104
12
SET MODE
■
Miscellaneous (others) set mode (continued)
EExxtteerrnnaall KKeeyyppaadd
This item sets the external keypad capability and
function.
For your information
The following diagram shows the equivalent circuit of
an external keypad and connects to the pin 3 and
pin 7 of the [MIC] connector (p. 18).
AAuuttoo
Pushing one of external keypad
switches, transmits the desired voice
memory during a phone mode (SSB,
AM or FM), or memory keyer contents
during CW mode operation.
VVOOIICCEE PPLLAAYY((TTXX))
Pushing one of external keypad
switches, transmits the desired voice
memory contents during a phone
mode operation.
KKEEYYEERR SSEENNDD
Pushing one of external keypad
switches, transmits the desired keyer
memory contents during CW mode
operation.
OOFFFF
External keypad does not function.
(default)
CCII--VV BBaauudd RRaattee
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and “Auto” are available.
When “Auto” is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
AAuuttoo
Auto baud rate
(default)
1199220000
19200 bps
CCII--VV AAddddrreessss
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-756PROIII’s address is 6Eh.
When 2 or more IC-756PROIII’s are connected to an
optional CT-17
CI
-
V LEVEL CONVERTER
, rotate the tun-
ing dial to select a different address for each IC-
756PROIII in the range 01h to 7Fh.
66EEhh
Address of 6Eh
(default)
77FFhh
Address of 7Fh
CCII--VV TTrraannsscceeiivvee
Transceive operation is possible with the
IC-756PROIII
connected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, op-
erating mode, etc. on the IC-756PROIII automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
OONN
Transceive ON
(default)
OOFFFF
Transceive OFF
CCII--VV wwiitthh IICC--773311
When connecting the IC-756PROIII to the IC-735 for
transceive operation, you must change the operating
frequency data length to 4 bytes.
•This item must be set to “ON” only when operating the
transceiver with the IC-735.
OONN
4 bytes of frequency data
OOFFFF
5 bytes of frequency data
(default)
12
