113
16
CONTROL COMMAND
•Command table (continued)
1A 0570 Send/read SSB transmit band-
width for WIDE setting
(Low: 100/300/500 Hz,
High: 2500/2700/2900 Hz)
0571 Send/read SSB transmit band-
width for MID setting
(Low: 100/300/500 Hz,
High: 2500/2700/2900 Hz)
0572 Send/read SSB transmit band-
width-NAR setting
(Low: 100/300/500 Hz,
High: 2500/2700/2900 Hz)
0573 Send/read clock2 function
(0=OFF, 1=ON)
0574 Send/read offset time for clock2
(240001=–24:00, 240000=+24:00)
0575 Send/read screen saver setting
(0=OFF, 1=15 min, 2=30 min,
3=60 min)
0576 Send/read RTTY TX USOS
(0=OFF, 1=ON)
06 Send/read DATA mode (0=OFF,
1=ON)
07 Send/read SSB transmit band-
width (0=Wide, 1=Middle, 2=Nar-
row)
1B 00 Set repeater tone frequency
01 Set tone squelch tone frequency
1C 00 Set the transceiver to receive or
transmit condition (0=Rx; 1=Tx)
01 Send/read tuner function (0=OFF,
1=ON, 2=Manual tune)
1A 0544 Send/read TX spectrum scope set
(0=OFF, 1=ON)
0545 Send/read spectrum scope max.
hold set (0=OFF, 1=ON)
0546 Send/read voice auto monitor set
(0=OFF, 1=ON)
0547 Send/read cut number style
(0=Normal, 1=190→ANO,
2=190→ANT, 3=90→NO,
4=90→NT)
0548 Send/read count up trigger chan-
nel (1=M1, 2=M2, 3=M3, 4=M4)
0549 Send/read present number
(1–9999)
0550 Send/read CW keyer repeat time
(1=1 sec. to 60=60 sec.)
0551 Send/read CW keyer dot/dash
ratio (28=1:1:2.8 to 45=1:1:4.5)
0552 Send/read rise time (0=2 msec.,
1=4 msec., 2=6 msec., 3=8 msec.)
0553 Send/read paddle polarity
(0=Normal, 1=Reverse)
0554 Send/read keyer type (0=Straight,
1=Bug-key, 2=ELEC-Key)
0555 Send/read mic. up/down keyer set
(0=OFF, 1=ON)
0556 Send/read scan speed (0=low,
1=high)
0557 Send/read scan resume (0=OFF,
1=ON)
0558 Send/read VOX gain (0=0% to
255=100%)
0559 Send/read anti VOX gain (0=0% to
255=100%)
0560 Send/read VOX delay (0=0.0 sec.
to 20=2.0 sec.)
0561 Send/read RTTY filter bandwidth
(0=250 Hz, 1=300 Hz, 2=350 Hz,
3=500 Hz, 4=1 kHz)
0562 Send/read twin peak filter (0=OFF,
1=ON)
0563 Send/read timer functions (0=OFF,
1=ON)
0564 Send/read DSP filter type
(0=SSB: sharp; CW: sharp,
1=SSB: sharp; CW: soft,
2=SSB: soft CW: sharp,
3=SSB: soft CW: soft)
0565 Send/read quick RIT/∂TX clear
function (0=OFF, 1=ON)
0566 Send/read SSB/CW synchronous
tuning function (0=OFF, 1=ON)
0567 Send/read CW normal side set
(0=LSB, 1=USB)
0568 Send/read external keypad type
(0=OFF, 1=Keyer send, 2=Voice
play (Tx), 3=Auto)
0569 Send/read NB level (0=0% to
255=100%)
Command Sub command Description Command Sub command Description
