670162
11
Zoom out
Zoom in
Vorherige Seite
1/180
Nächste Seite
MF3 (MULTI-FUNCTION 3 SWITCH)
P.AMP SWITCH (P.AMP) (p. 72)
Selects one of 2 receive RF preamps
or bypasses them.
• “P. AMP1” activates 10 dB preamp.
• “ P. AMP2” activates 16 dB high-gain pre-
amp.
• “P. AMP OFF” can also be selected.
Turns the preamp function OFF when
pushed and held for 1 sec.
What is the preamp?
T
he preamp amplifies signals in the front end to
improve S/N ratio and sensitivity. Select “P. AMP1”
or “P. AMP2” when receiving weak signals.
MF4 (MULTI-FUNCTION 4 SWITCH)
ATT SWITCH (ATT) (p
. 72)
Selects 6 dB, 12 dB or 18 dB attenua-
tor when pushed.
• “ATT OFF” can also be selected.
Turns the attenuator function OFF
when pushed and held for 1 sec.
What is the attenuator?
T
he attenuator prevents a desired signal from
being distorted when very strong signals are near
the desired frequency, or when very strong electro-
m
agnetic fields, such as from a broadcasting sta-
tion, are near your location.
MF5 (MULTI-FUNCTION 5 SWITCH)
AGC SWITCH (AGC) (p. 74)
Activates and selects fast, middle
or slow AGC time constant when
pushed.
In FM mode, only “FAST” is available.
Enters the AGC set mode when
pushed and held for 1 sec.
AGC time constant can be set be-
tween 0.1 to 8.0 sec. (depends on
mode)
, or turned OFF. When AGC is
“OFF, the S-meter does not function.
What is the AGC?
T
he AGC controls receiver gain to produce a con-
s
tant audio output level, even when the received
signal strength varies dramatically. Select “FAST”
for tuning and then select MIDor SLOWde-
pending on the receiving condition.
MF6 (MULTI-FUNCTION 6 SWITCH)
VOX SWITCH (VOX) (p. 84)
Push to turn the VOX function ON and
OFF during SSB, AM and FM mode
operation.
Push and hold for 1 sec. to enter VOX
set mode.
What is the VOX function?
T
he VOX function (voice operated transmission)
activates transmission without pushing the trans-
mit
switch or PTT switch when you speak into the
microphone; then automatically returns to receive
when you stop speaking.
BK-IN SWITCH (BK-IN) (p. 85)
Selects semi break-in, full break-in
operation, or turns the break-in opera-
tion OFF when pushed in CW mode.
What is the break-in function?
T
he break-in function switches transmit and re-
ce
ive with CW keying. Full break-in function (QSK)
can monitor the receive signal during keying.
MF7 (MULTI-FUNCTION 7 SWITCH)
COMP SWITCH (COMP) (p. 86)
Turns the speech compressor ON and
OFF in SSB mode.
Switches the narrow, middle or wide
compression when pushed and held
for 1 sec.
What is the speech compressor?
The speech compressor compresses the trans-
mit
ter audio input to increase the average audio
output level, to increase talk power. This function is
effective for long-distance communication or when
propagation conditions are poor.
1
4
SWITCH (
1
4
) (p. 30)
Turns the
1
4 speed tuning function
ON and OFF in SSB data, CW, RTTY
and PSK modes.
1
4 function sets dial rotation to
1
4 of
normal speed for fine tuning.
TONE SWITCH (TONE) (pgs. 62, 63)
Switches between the tone encoder,
tone squelch function and no-tone op-
eration when pushed in FM mode.
Enters the tone set mode when
pushed and held for 1 sec. in FM
mode.
4
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-7600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info