Bedienungsanleitung Icom IC-7600 (Seite 14 von 180) (Englisch)

670162

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

#0 TRANSMIT INDICATOR [TX]

Lights red while transmitting.

#1 RECEIVE INDICA

TOR [RX]

Lights green while receiving a signal and when the

squelch is open.

LCD FUNCTION DISPLAY (p. 13)

Shows the operating frequency, function switch

menus, spectrum scope screen, memory list

screen, set mode settings, etc.

#3 SPLIT OPERA

TION INDICATOR [SPLIT] (p. 88)

Lights during split frequency operation.

#4 MAIN/SUB CHANGE SWITCH [CHANGE]

➥

Switches the frequency and selected memory

channel between main and sub readouts when

pushed.

• Switches between transmit frequency and receive

frequency when the split frequency function is ON.

(p. 88)

➥ Equalizes the sub readout frequency to the

main readout frequency when pushed and held

for 1 sec.

LOCK INDICATOR [LOCK] (p. 82)

Lights when the dial lock function is activated.

#6 DU

ALWATCH SWITCH [DUALWATCH] (p. 79)

➥ Push to turn the dualwatch function ON and

OFF.

• “ ” appears when the dualwatch function

is in use.

➥ Push and hold for 1 sec. to turn the dualwatch

function ON and equalizes the sub readout fre-

quency to the main readout. (Quick dualwatch

function)

• The quick dualwatch function can be turned OFF in

others set mode. (p. 128)

#7 SPLIT SWITCH [SPLIT] (p. 88)

➥ Push to turn the split function ON and OFF.

• “ ” appears when the split function is in

use.

➥ Push and hold for 1 sec. to activate the quick

split function.

• The split function ON and equalize the sub readout

frequency to the main readout and sets the sub

readout for frequency input in non-FM modes. (p. 89)

• The offset frequency is shifted from the selected

VFO frequency in FM mode. (p. 129)

• The tone encoder function is turned ON in FM

mode.

• The quick split function can be turned OFF in others

set mode. (p. 129)

#8 KEYPAD

➥ Pushing a key selects the operating band. (p. 27)

• [GEN •] selects the general coverage band.

➥ Pushing the same key 2 or 3 times calls up

other stacked frequencies in the band.

(p. 27)

• Icom’s triple band stacking register memorizes 3 fre-

quencies in each band.

➥ After pushing [F-INP ENT], push a key on the

keypad to enter a numeric frequency. After en-

tering, push [F-INP ENT] to select the desired

frequency directly

(p. 28)

• e.g. to enter 14.195 MHz;

Push [F-INP ENT] [1] [4] [•] [1] [9] [5] [F-INP ENT].

➥ After pushing [F-INP ENT], push a key on the

keypad to enter a memory channel. After enter-

ing, push [∫]/[√] to select the desired memory

channel directly.

(p. 99)

■ Front panel (continued)

TWIN

PBT

RIT/ TX

NOTCH

CW PITCH

VOICE MEMORY

BAL NR

AF RF/SQL

MIC GAIN RF POWER BK

IN DELAY KEY SPEED

TIMER

PHONES

ELEC

KEY

MIC

AUTO

TUNE

GENE F

INP

1.8 3.5

1 2

ENT

CHANGE

XFC

SPLIT

DUAL

WATCH

MAIN

SUB

M.SCOPE

VFO/MEMO

NRNB

PBT

CLR

APF/TPF

NOTCH

POWER

RIT

CLEAR

SPEECH

LOCK

FILTER

REC PLAY

EXIT

SET

SSB CW

RTTY

PSK

AM/FM

MONITOR

TRANSMIT

TUNER

HF/50MHz TRANSCEIVER

LOCKTX RX SPLIT

#0 #5#4 #6 #7 #8 #9

#3#2#1

$4$5

PANEL DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-7600 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info