Bedienungsanleitung Icom IC-7610 (Seite 2 von 80) (Englisch)

670161

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Thank you for choosing this Icom product. The IC-7610 HF/50 MHz TRANSCEIVER is designed and built with

Icom’s state of the art technology and craftsmanship. With proper care, this product should provide you with

years of trouble-free operation. We appreciate you making the IC-7610 your transceiver of choice, and hope you

agree with Icom’s philosophy of “technology rst.” Many hours of research and development went into the design

of your IC-7610.

FEATURES

• RF Direct Sampling System

The IC-7610 employs an RF direct sampling system.

RF signals are directly converted to digital data and

processed in the FPGA. This system is a leading

technology marking an epoch in amateur radio.

• 2 identical receivers

The IC-7610 has 2 independent receiver circuits for the

Main and Sub bands.

• A built-in DIGI-SEL unit

Both the Main and Sub receivers have built-in DIGI-SEL

(digital preselector) units. These reject interfering signals.

• Real-Time Spectrum Scope

Displays the Main and Sub band conditions. It provides

class-leading performance in resolution, sweep speed and

provides a 100 dB dynamic range.

• A built-in automatic antenna tuner

• Multi-function control for easy settings

• Extra large 7 inch touch screen color display

• External monitor connection with a DVI-D port

• BNC type RX IN/OUT connectors

• Class Leading RMDR and Phase Noise

Characteristics

• IP remote control capability with the optional

RS-BA1

ip remote control software

• Remote encoder capability with the optional

RC-28 remote encoder

• Dualwatch operation

SUPPLIED ACCESSORIES

L Different types of accessories may be supplied, or may

not be supplied depending on the transceiver version.

IMPORTANT

READ ALL INSTRUCTIONS carefully completely

before using the transceiver.

SAVE THIS INSTRUCTION MANUAL— This instruction

manual contains basic operating instructions for the IC-

7610. For the advanced operating instructions, see the

Advanced Manual on the supplied CD.

This product includes RTOS “RTX” software, and is

licensed according to the software license.

This product includes “zlib” open source software,

and is licensed according to the open source

software license.

This product includes “libpng” open source software,

and is licensed according to the open source

software license.

Refer to the Text les in the License folder of

included CD for information on the open source

software being used by this product.

Icom is not responsible for the destruction, damage to, or

performance of any Icom or non-Icom equipment, if the

malfunction is because of:

• Force majeure, including, but not limited to, res,

earthquakes, storms, oods, lightning, or other natural

disasters, disturbances, riots, war, or radioactive

contamination.

• The use of Icom transceivers with any equipment that is

not manufactured or approved by Icom.

Hand microphone

(HM-219)

DC power cable

(3 m: 9.8 ft)

Spare fuse

(30 A)

Spare fuse

(5 A)

CW key plug

(6.35 mm: 1/4" Stereo)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-7610 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info