7-3
■ Recording a received audio
Up to 20 channels of receive voice memories are
available in the IC-7800. And the total audio length of
up to 209 sec. can be recorded in receive channels.
However, the maximum recordable length into a single
channel is 30 sec.
This voice recorder records not only the received
audio, but also the information such as set operating
frequency, mode, and the recording time for your fu-
ture reference.
DD
Basic recording
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select the desired mode.
e Push [F-2•VOICE] to call up the voice recorder
screen.
• Previously selected screen, TX or RX memory, is dis-
played. If the TX memory channel (T1–T4) appears,
push [F-7•T/R] to select RX memory channel.
r Push [REC] for 1 sec. to start recording.
• The operating frequency, mode and current time are pro-
grammed as the memory names automatically.
t Push [REC] momentarily to stop recording.
IMPORTANT!
Push [REC] to stop recording before, or when
30 sec. has passed from the start of recording.
The voice recorder memory records the 30 sec.
(max.) of audio before [REC] is pushed.
For example, when recording 40 sec. of audio,
the first 10 sec. audio will be over-recorded with
the last 10 sec., so that the total of audio recorded
is 30 sec. only.
When you record the 21st audio segment, or
when the total audio length exceeds 209 sec., the
oldest recorded audio is automatically erased to
make room for the new audio.
y Push [EXIT/SET] twice to exit the voice recorder
screen.
NOTE: When transmit (or [PTT] is pushed) while
recording, no audio will be recorded.
DD
One-touch recording
To record the receiving signal contents immediately,
one-touch voice recording is available.
➥ Push [REC] momentarily to records the previous
15 sec. audio.
• The recordable time period can be set in voice set mode.
(p. 7-9)
