7-8
■ Sending a recorded message
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select a phone mode by pushing [SSB] or [AM/FM].
e Push [F-2•VOICE] to call up the voice recorder
screen.
• If the receive voice memory channel appears, push
[F-7•T/R] to select TX memory channel (T1–T4).
r Push the desired memory channel switch, [F-1•T1]
to [F-4•T4], momentarily to transmit the contents.
• The transceiver transmits automatically.
• “ ” indicator appears and the memory timer
counts down.
• You hear the transmitted message from the speaker as
the default. This can be turned OFF in voice set mode.
(p. 7-9)
t Push the selected memory channel switch, [F-1•T1]
to [F-4•T4], again to stop, if desired.
• The transceiver returns to receive automatically when all
of the recorded contents in the channel are transmitted.
y Push [EXIT/SET] twice to exit the voice memory
screen.
✔
For your information
When an external keypad is connected to [EXT KEY-
PAD], the recorded message, T1–T4, can be transmit-
ted without opening the voice recorder screen.
See page 2-6 for details.
DD
Transmit level setting
q Call up the voice recorder screen as described as
above.
w Push [F-6•TX LEV.] to select the voice memory
transmit level set condition.
e Push the desired memory channel switch, [F-1•T1]
to [F-4•T4], momentarily to transmit the contents.
• The transceiver transmits automatically.
• “ ” indicator appears and the memory timer
counts down.
r Rotate the main dial to adjust the transmit voice
level.
• Push [F-7•DEF] for 1 sec. to select the default condition.
t Push [EXIT/SET] to return to the voice recorder
screen.