15
SPECIFICATIONS
8
D General
• Frequency coverage : 118 to 136.975 MHz
• Channel spacing : 25 kHz or 25/8.33* kHz
• Mode : AM (6K00A3E)
• Number of memory channels : 20
• Acceptable power supply : 13.75* V or 27.5* V DC
(negative ground) *Automatic selection
• Usable temp. range : –30˚C to +60˚C
• Frequency stability : ±5 ppm
• Current drain
(at 13.75 V DC):
Tx 5 A (max.)
Rx 4 A ( at AF max.)
0.5 A (at STAND BY)
• Dimensions : 150 (W)✕50 (H)✕180 (D) mm
(projections not incl.) 5
29
/32(W)✕1
31
/32(H)✕7
3
/32(D) in
• Weight : 1.5 kg; 3 lb 5 oz
D Transmitter
• Output power : 36 W (pep) typical
9 W (carrier) typical
• Modulation : Last Stage modulation
• Modulation limiting : 70 to 100 %
• Audio harmonic distortion : Less than 10 %
(at 85 % modulation)
• Hum and noise ratio : More than 40 dB
• Spurious emissions : –16dBm or less
• Antenna impedance : Standard 50 Ω with SWR <3
D Receiver
• Receive system : Double conversion
superheterodyne
• Intermediate frequencies : 1st 38.85 MHz
2nd 450 kHz
•Sensitivity
(at 6dB S/N) : Less than 1 µV (pd)
• Squelch sensitivity : Less than 0.35 µV (pd)
(at threshold)
• Selectivity
25 kHz ch. spacing : More than ±8 kHz (at –6 dB)
Less than ±17 kHz (at –40 dB)
Less than ±25 kHz (at –60 dB)
8.33* kHz ch. spacing More than ±2.778 kHz (at –6 dB)
Less than ±7.37 kHz (at –60 dB)
• Spurious response rejc, : More than 74 dBµ
• Audio output power : More than 10 W (at 13.75 V DC
with 8 Ω load 60 % MOD. 10%
distortion)
Side tone More than 100 mW (with 500 Ω
load 60% MOD. 10 % distortion)
• Hum and noise : More than 25 dB
• Audio output impedance : Ext. SP 8 Ω
Side tone 500 Ω
*Except USA version
All stated specifications are subject to change without notice or
obligation.
