38
7
SCAN OPERATION
7
■ Auto memory write scan
This scan is useful for searching a specified frequency range
and automatically storing busy frequencies into memory
channels. The same frequency ranges used for program scan
are used for auto memory write scan.
qSelect VFO mode with [V/M] (
SKIP
•
S
.
MW
), if necessary.
wPush and hold [CALL] (
MODE
•
SCAN
) for 1 sec. to enter
scan type selection condition.
eRotate [DIAL] to select the desired scanning type.
• “ALL” for full scan; “BAND” for band scan, “PROGxx” for pro-
grammed scan (xx= 0 to 24; programmed scan edges numbers
only displayed)
rPush [CALL] (
MODE
•
SCAN
) to start the scan.
tPush [V/M] (
SKIP
•
S
.
MW
) to toggle the automatic memory
write function ON and OFF.
•“ ” indicator blinks during auto memory write.
yPush [CALL] (
MODE
•
SCAN
) to stop scan.
DD
During auto-memory write scanning:
• When a signal is received, scan pauses and the frequency
is stored into auto memory write channel group (000
♦
–199
♦
).
-2 short beeps sound when stored.
• Scan resumes after frequency storing.
• When all channels are stored, the scan cancels automati-
cally and 1 long beep sounds.
DD
Re-calling the stored frequencies:
qPush [V/M] (
SKIP
•
S
.
MW
) to select memory mode.
wPush [BAND] (
TS
•
LOCK
) several times, or while pushing
and holding [BAND] (
TS
•
LOCK
), rotate [DIAL] to select the
auto memory write channel group.
•“♦” appears.
eRotate [DIAL] to select the desired channel.
DD
Clearing the stored frequencies:
qSelect the auto memory write channel group.
wWhile pushing and holding [FUNC], push and hold
[V/M] (
SKIP
•
S
.
MW
) for 1 sec. to clear the all channels con-
tents.
•1 short and 1 long beeps sound.
NOTE: The auto memory write channel contents CANNOT
be cleared as an independent channel. Thus it is a good
idea to copy the contents into a memory channel.
