670354
26
Zoom out
Zoom in
Vorherige Seite
1/182
Nächste Seite
2
PANEL DESCRIPTION
2-18
Assignable Software key functions
Category: Signaling/Call (Continued)
Status
Push to display the “Status List” screen. Then, push
[Up] or [Down] to select a Status message.
After selecting, push [PTT] to send the message to
the currently selected station or group. Or, push [OK]
to set.
L See pages 7-6, 8-14 for details.
Message
While in the Standby mode, push to display the
“Message List” screen. Then, push [Up] or [Down] to
select a message.
After selecting, push [PTT] to send the message to
the currently selected station or group.
L See pages 7-8, 8-16 for details.
Write Message
In the Digital mode
Push to display the “Write Message” screen.
After entering, push [PTT] to send the message to the
currently selected station or group.
L See page 7-9 for details.
Category: Trunking
Site Select
In the Digital mode
z Push to display the “Site Select” screen. Then, push
[Up] or [Down] to select a site number.
After selecting, push [OK] to set the selected site.
• The selected site is locked.
z While in the Standby mode, hold down [Site Select]
for 1 second to unlock the site.
Site Lock
In the Digital mode
Push to turn the Site Lock function ON or OFF.
L When this function is turned ON, the transceiver cancels
resuming a roaming scan, and stays on the current site,
regardless of the error rate.
Roaming Request
In the Digital mode
Push to turn the Roaming Request function ON or
OFF.
L When this function is turned ON, the transceiver starts or
resumes a roaming scan, regardless of the error rate.
L When the Site Lock function is turned ON, pushing this
key resumes a roaming scan.
Category: Functions
Light
Push to turn ON the backlight for about 5 seconds,
even if the backlight setting is OFF.
Lock
Hold down for 1 second to turn the Key Lock function
ON or OFF.
L All assignable keys except the following are electronically
locked: [Monitor], [Light], [Lock], [Call], [Emergency], and
[Surveillance]. Also, [PTT] and [Power] are usable.
Public Address (For the Mobile type transceivers)
Push to activate the Public Address (PA) function.
And then, speak into the microphone while holding
down [PTT].
L When the PA function is activated, the audio output can
be separately controlled from the transceiver by pushing
[Up] or [Down].
NOTE: This function is usable when an external
unit, such as a audio amplier, speaker, and so on is
connected to the D-sub 25-pin connector.
RX Speaker (For the Mobile type transceivers)
Push to turn the RX Speaker function ON or OFF.
L When the RX Speaker function is turned ON, the received
audio can be heard through an external speaker that is
connected to the D-sub 25-pin connector.
NOTE:
This function is usable when an external speaker
that is connected to the D-sub 25-pin connector.
This function is useful when a user is out of the
vehicle.
The audio output level is linked to the transceiver’s
volume control.
Hook Scan (For the Mobile type transceivers)
Push to temporarily turn the Hook Scan function ON
or OFF.
Horn (For the Mobile type transceivers)
Push to turn the Horn function ON or OFF.
L When the Horn function is ON, the HORN terminal of the
D-Sub 25 pin or Option Connector 22 pin is activated after
receiving a call*.
* Only a call that the Dec EXO or RX EXO setting is ON.
L This function is useful when a user is away from the
transceiver.
NOTE: This function is usable when an external horn
is required.
D For keys and keypads
Previous view
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-F3400D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info