670354
66
Zoom out
Zoom in
Vorherige Seite
1/182
Nächste Seite
6
MENU SCREEN
6-12
Call Recorder
microSD card is required
z Rec Start
Push [OK] to start the audio recording.
• “ ” is displayed.
InformationL
While holding down [PTT], “ ” blinks, and the
communication audio is recorded.
” is displayed when the microSD card has no free
space and cannot record audio.
While recording, “Rec Stop” is displayed in the “Call
Recorder” screen.
Once the recording has started, the recording will continue,
even if the transceiver is restarted.
• To stop the recording, select “Rec Stop.”
z Rec Stop
Push [OK] to stop the audio recording.
• “ ” disappears.
Play Call Rec
microSD card is required
Do the following steps to play back the recorded audio
on the microSD card.
Select “Play Call Rec,” then push [OK] to display the
folders on the microSD card.
LThese folders contain the audio les.
Playing back
1. Push [Up] or [Down] to select the folder that
includes the desired file to play back, then push
[OK].
2. Push [Up] or [Down] to select the le to play back,
then push [OK].
3. Push [Play] to play back.
The selected le is played back.
• See page 10-5 for details.
4. Hold down [Back] for 1 second to return to the
standby screen.
NOTE:
The folder name is automatically created, as shown
in the example below:
Recording date is 2016/7/1
Folder name: 20160701
The le name is automatically created, as shown in
the example below:
Recording date and time is 2016/7/1 15:30:00
File name: 20160701_153000
The audio is recorded onto an microSD card, and
saved in the “wav” format. (“wav,” is not displayed
on the transceiver’s screen.)
The recorded audio can also be played back with a
PC. (p. 10-9)
Voice Rec
Play Emer Call
microSD card is required
Do the following steps to play back the recorded
Emergency audio on the microSD card.
Select “Play Emer Call,” then push [OK] to display the
folders on the microSD card.
LThese folders contain the audio les.
Playing back
1. Push [Up] or [Down] to select the folder that
includes the desired file to play back, then push
[OK].
2. Push [Up] or [Down] to select the le to play back,
then push [OK].
3. Push [Play] to play back.
The selected le is played back.
• See page 10-6 for details.
4. Hold down [Back] for 1 second to return to the
standby screen.
NOTE:
The folder name is automatically created, as shown
in the example below:
Recording date is 2016/7/1
Folder name: 20160701
The le name is automatically created, as shown in
the example below:
Recording date and time is 2016/7/1 15:30:00
File name: 20160701_153000
The audio is recorded onto an microSD card, and
saved in the “wav” format. (“wav,” is not displayed
on the transceiver’s screen.)
The recorded audio can also be played back with a
PC. (p. 10-9)
Previous view
66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-F3400D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info