Bedienungsanleitung Icom IC-F3400D (Seite 154 von 182) (Englisch)

670354

154

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

USER SETTINGS

12-2

Setting the Backlight status

Portable: For the Ten-key and the Simple key types

Push [Backlight] to select the option

• OFF: Turns the Backlight continuously OFF.

• ON: Turns the Backlight continuously ON.

• Auto: When any key except [PTT] is pushed, the

Backlight lights for 5 seconds.

Mobile: For the LCD types

Push [Backlight] to select the option

• OFF: Turns the Backlight continuously OFF.

• ON: Turns the Backlight continuously ON.

• Auto: Turns the Backlight continuously ON.

When the Dimmer terminal of the D-Sub 25

pin or Option Connector 22 pin is activated,

the Backlight lights dimly.

Mobile: For the Segment types

1. Turn OFF the transceiver.

2. While holding down [F2] and [F3], turn ON the

transceiver. Continue holding down [F2] and [F3]

for about 3 seconds.

• 2 beeps sound.

3. Hold down [F1] for 1 second to enter the Set

mode.

4. Push [F2] or [F3] to display “A0.”

5. Push [Up] or [Down] to select the option.

• OFF: Turns the Backlight continuously OFF.

• ON: Turns the Backlight continuously ON.

• Auto: Turns the Backlight continuously ON.

When the Dimmer terminal of the D-Sub

25 pin or Option Connector 22 pin is

activated, the Backlight lights dimly.

Auto

OFF

: Push [Up]

: Push [Down]

6. Hold down [F1] for 1 second to exit the Set mode.

7. Turn OFF the transceiver, then turn it ON again to

normally operate it.

You can set the Backlight status.

Portable: For the Ten-key and the Simple key types

Mobile: For the LCD types

( Menu > Display > Backlight)

1. Push [Menu] to display the Menu screen.

2. Push [Left] or [Right] to select “Display,” then

push

[OK].

3. Push [Up] or [Down] to select “Backlight,” then

push [OK].

4. Push [Up] or [Down] to select an appropriate

option, then

push [OK].

For the Portable types:

• OFF: Turns the Backlight continuously OFF.

• ON: Turns the Backlight continuously ON.

• Auto: When any key except [PTT] is pushed, the

Backlight lights for 5 seconds.

For the Mobile types:

• OFF: Turns the Backlight continuously OFF.

• ON: Turns the Backlight continuously ON.

• Auto: Turns the Backlight continuously ON.

When the Dimmer terminal of the D-Sub 25 pin

or Option Connector 22 pin is activated, the

Backlight lights dimly.

5. Hold down [Back] for 1 second to return to the

standby screen.

Portable: For all types

When [Backlight] is assigned to the Lever switch:

z Slide the Lever switch to the “ ” position to turn the

backlight continuously ON.

z Slide the Lever switch to the “Ο” position to turn the

backlight continuously OFF.

F1 F2 F3

[Up]

[Down][F1] [F2] [F3]

Power key

NOTE: When the Brightness or Dimmer* level is set

to “0,” nothing may be displayed on the segment type

screen. In that case, set the Brightness or Dimmer*

level using the optional programming software.

* Only when the Dimmer terminal of the D-Sub 25 pin or

Option Connector 22 pin is activated.

Previous view

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-F3400D Seite 154

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info