12
3
BIIS OPERATION
DD
Group call
qWhen a group call is received;
• Beeps sound.
•“ ” appears and the mute is released.
• The programmed text message
(e.g. “”)
and the calling station ID (or text) is displayed alternately.
•“ ” appears or blinks depending on the setting.
wPush and hold [PTT] (microphone), then speak into the mi-
crophone at a normal voice level.
NOTE: Only one station is permitted.
•“ ” appears during transmit.
eRelease [PTT] to return to receive.
•“ ” appears while receiving a signal.
rTo finish the conversation, push [MONI (P4)] to send the
“Clear down” signal.
• Either station can send.
•“ ” is displayed for 2 sec. (approx.).
•“ ” disappears and the transceiver return to standby condition.
DD
Displaying the received call record
— Queue indication
The transceiver memorizes the calling station IDs for record.
Up to 3 calls can be memorized, and the oldest call record is
erased when a 4th call is received. However, once the trans-
ceiver is powered OFF, all records are cleared.
qPush [DIGITAL (P1)] for 1 sec.
• Displays following indication.
wPush [ ]/[ ] to select the desired call.
ePush [DIGITAL (P1)] for 1 sec. again to return to standby
condition.
• When no operation is performed for 30 sec., the transceiver re-
turns to standby condition automatically.
