Bedienungsanleitung Icom IC-F62D dPMR (Seite 18 von 117) (Englisch)

670350

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

PANEL DESCRIPTION

2-11

Category: Signaling/Call

Call

In the Analog mode

Push to make a call to the preset destination in the

channel�

Call A/Call B

In the Analog mode

Push to transmit a preset 2/5-Tone code or BIIS Call

Setup to the preset destination�

In the Digital mode

Push to transmit a Call Setup to the preset

destination�

Re-dial

Push to send the last transmitted DTMF code number�

L Redial will be cleared when the transceiver is turned OFF

once�

Call List Select

1� Push to display the “Call List” screen�

2� Push [P1 (Down)] or [P2 (Up)] to select an ID

name (or ID code)�

3� After selecting, push [OK] to set, and return to the

Standby mode�

Call Menu

1� Push to display the “Call Menu” screen�

2� Push [P1 (Down)] or [P2 (Up)] to select an ID

name (or ID code)�

3� After selecting, push [OK] to set, and display the

call function screen�

4� Push [P1 (Down)] or [P2 (Up)] to select a call

function�

L See ‘Transmitting a call’ on Sections 7 and 8 for

details�

5� After selecting, push [PTT] to make a call to the

selected station or group�

DTMF Autodial

z Push to display the “DTMF Autodial” screen� Then,

push [P1 (Down)] or [P2 (Up)] to select a DTMF

code� After selecting, push [PTT] to transmit the

selected DTMF code�

z While in the Standby mode, hold down for 1 second

to transmit the currently selected DTMF code�

Emergency

1� Hold down during the Emer SW ON Timer period

to enter the Emergency mode�

2� After the Reminder Timer period has passed, an

Emergency call is automatically transmitted once,

or repeatedly�

NOTE:

• Set the related settings using the programming

software�

• This key function is assignable to only [Emer] or

[Ext� Emer]�

L Hold down during the Emer SW OFF Timer

period to cancel the Emergency function, before

transmitting an Emergency call�

Telephone

In the Digital mode (dPMR™ Trunking only)

1� Push to display the “Phone List” screen�

2� Push [P1 (Down)] or [P2 (Up)] to select a phone

number�

3� Push [OK] to connect to the telephone network�

Individual

1� Push to display the “Individual ID” screen�

2� Push [P1 (Down)] or [P2 (Up)] to select an

Individual ID name (or ID code)�

3� Push [OK] to set�

Group

1� Push to display the “Group ID” screen�

2� Push [P1 (Down)] or [P2 (Up)] to select an Group

ID name (or ID code)�

3� Push [OK] to set�

Status

1� Push to display the “Status List” screen�

2� Push [P1 (Down)] or [P2 (Up)] to select a Status

message�

3� Push [PTT] to send the message to the currently

selected station or group, or push [OK] to set�

L See pages 7-5 and 8-4 for details�

Message

1� While in the Standby mode, push to display the

“Message List” screen�

2� Push [P1 (Down)] or [P2 (Up)] to select a

message�

3� Push [PTT] to send the message to the currently

selected station or group�

L See pages 7-6 and 8-5 for details�

Write Message

1� Push to display the “Write Message” screen�

2� Write a message�

3� Push [PTT] to send the message to the currently

selected station or group�

L See pages 7-7 and 8-6 for details�

Assignable Software key functions

Previous view

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-F62D dPMR Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info