Bedienungsanleitung Icom IC-F62D dPMR (Seite 52 von 117) (Englisch)

670350

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

MENU SCREEN

6-9

Call List Select

Selects a calling destination� After selecting, push

[PTT] to transmit the voice call to the selected

destination� (pp� 3-9, 7-3, 7-4, 8-3)

Call Menu

In the Analog mode

Selects a calling destination and a call type (Status,

Message, or Write Message)� you can select or

directly enter a message before transmitting it� After

selecting or entering a message, push [PTT] to

transmit it� (pp� 7-4 ~ 7-6, 8-4, 8-5)

In the Digital mode

Selects a calling destination and a call type (Status,

Message, Write Message, Ambience Listening, Stun,

Revive, Kill, and Broadcast)� After selecting, push

[PTT] to transmit the call to the selected destination�

(pp� 7-5 ~ 7-10)

NOTE: When the call type is “Status,” “Message,”

or “Write Message,” you can select or directly enter

a message before transmitting it� After selecting or

entering a message, push [PTT] to transmit it� See

pages 7-5 ~ 7-7 for details�

Clear Incoming

Clears the received call log from the Incoming list�

(pp� 7-20, 8-10)

Clear Outgoing

In the Digital mode

Clears the transmit call log from the Outgoing list�

(p� 7-22)

DTMF Autodial

Displays the “DTMF Autodial” screen� Then, push

[P2 (Up)] or [P1 (Down)] to select a DTMF code� After

selecting, push [PTT] to transmit the selected DTMF

code�

Group Select

Displays the “Group Select” screen� Then, push

[P2 (Up)] or [P1 (Down)] to select a Group ID from

the Call List� After selecting, push [PTT] to transmit a

Group call�

Incoming

Displays a log of the received Individual call, Status

message, and Message� (pp� 7-20, 8-9)

INDIV Select

Displays the “Individual Select” screen� Then, push

[P2 (Up)] or [P1 (Down)] to select a Individual ID from

the Call List� After selecting, push [PTT] to send a

Individual call�

Message

In the Analog mode (BIIS only)

In the Digital mode

Displays the “Message” screen� Then, push [P2 (Up)]

or [P1 (Down)] to select a message� After selecting,

push [PTT] to send the Message to the currently

selected destination� (pp� 7-6, 8-5)

Outgoing

In the Digital mode

Displays a log of the transmitted Individual calls� (p� 7-22)

Status

Displays the “Status” screen� Then, push [P2 (Up)]

or [P1 (Down)] to select a status message� After

selecting, push [PTT] to send the message to the

currently selected destination� (pp� 7-5, 8-4)

Telephone

In the Digital mode (dPMR™ Trunking only)

Displays the “Phone List” screen� Then, push [P2

(Up)] or [P1 (Down)] to select a phone number� After

selecting, push [PTT] to connect to the telephone

network�

Write Message

Enables the user to directly enter a Message� After

entering, push [PTT] to transmit it� (pp� 7-7, 8-6)

Signaling/Call

Previous view

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-F62D dPMR Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info