670368
19
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Adjusting the squelch level
Squelch is a function that allows the audio to be heard only
while receiving a signal that is stronger than a set level. You
can adjust the squelch threshold level.
A higher level blocks weak signals, so you receive only
stronger signals. A lower level allows you to hear weak
signals including noise.
Adjust the squelch level when you want to:
•blockweaksignalsincludingnoise Set the level higher.
•hearweaksignals,eveninthenoise Set the level lower.
You can adjust the squelch level while the SQL” icon is blinking.
q
Push [VOL/SQL] twice.
•The“SQL icon starts blinking.
•Ifnokeyoperationisperformedfor5seconds,thetransceiver
returns to the normal operating mode.
w
Push [Y] or [Z]
to adjust the squelch level.
•Thelevelisdisplayedonthescreen.
Push e
[VOL/SQL]
once.
•Returnstothenormaloperatingmode.
Monitor function
The Monitor function momentary cancels the squelch
function. You can check for weak signals.
Hold down
[MONI] (VOL/SQL) for 1 second
.
•“ blinks.
•Ifthereisaweaksignal,youcanhearthesignalandnoise.
•Release[MONI] (VOL/SQL) to turn OFF this function.
NOTE: Thisfunctionhasoptions.Seepage19formore.
Toggling the transmit power
If you receive no response to your call, your transmitted
signal might not reached the person you called. Choose high
power for longer distance communications.
On the other hand, transmitting at low power is enough to
communicate, according to the distance. Choose low power
for short range communication and battery conservation.
Push [Hi/Lo] to toggle the transmit power between low and high.
•LOW” is displayed when low power is selected. No indication is
displayed when high power is selected.
NOTE:
•Somechannelsarerestrictedtolowpower.
•YoucannottransmitonChannel70.
11
4
BASICOPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Squelch level.
While blinking, adjust the squelch.
Blinks while the function is activated.
Hold down
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-M25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info