12612
19
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
13
5
SCAN OPERATION
New2001
5
Setting tag channels
For more efficient scanning, add the desired channels as tag
channels or clear the tag for unwanted channels.
Channels are not tagged will be skipped during scanning. Tag
channels can be assigned to each channel group (Interna-
tional and U.S.A.*) independently.
q Push both [] and [] to select the desired channel group
(International and U.S.A.*).
w Select the desired channel to be set as a tag channel.
e Push [SCANTAG] for 1 sec. to set the displayed channel
as a tag channel.
•“TAG” appears in the display.
r To cancel the tag channel setting, repeat step e.
•“TAG” disappears.
Clearing (or setting) all tagged channels
While pushing [HI/LO] on the microphone, push [SCANTAG]
for 3 sec. (until a long beep changes to 2 short beeps) to clear
all tag channels in the channel group.
• Repeat above procedure to set all tag channels.
Starting a scan
Set scan type (priority or normal scan) and scan resume timer
in advance using set mode. (p. 45)
q Push [] and [] to select the desired channel group (In-
ternational and U.S.A.*) if desired.
w Set tag channels as described at left.
e Make sure the squelch is closed to start a scan.
r
Push [SCANTAG] to start priority or normal scan.
•“PRI-SCAN 16” or “NORMAL SCAN” appears in the function
display.
When a signal is detected, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to set mode
setting. (Channel 16 is still monitored during priority scan.)
• Push [] or [] to check the scanning tag channels, to change
the scanning direction or resume the scan manually.
A beep tone sounds and “16” blinks when a signal is received
on Channel 16 during priority scan.
t To stop the scan, push
[SCANTAG]
.
*U.K. version only
[Example]: Starting a normal scan.
-INTINT----
25W25W-DUPDUP-TAGTAG-
-
2323 34.154N34.154N-
135135 34.351E34.351E-
- INTLINTL - UTCUTC-12:0012:00-
-INTINT----
25W25W-DUPDUP-TAGTAG-
NORMALNORMAL SCANSCAN-
2323 34.154N34.154N-
135135 34.351E34.351E-
--UTCUTC-12:0012:00-
BUSYBUSY-INTINT----
25W25W-DUPDUP-TAGTAG-
NORMALNORMAL SCANSCAN-
2323 34.154N34.154N-
135135 34.351E34.351E-
- INTLINTL - UTCUTC-12:0012:00-
Push
Scan starts. When a signal is received.
!IC-M421-3.qxd 06.5.26 1:43 PM Page 13 (1,1)
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-M421 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info