Bedienungsanleitung Icom IC-M802 (Seite 52 von 78) (Englisch)

12680

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

DSC MENU OPERATION

2001 NEW

■ General

Up to 100 ID codes with frequency and name can be

programmed in MENU mode for easy recall during

DSC call setting.

In addition, the following settings/operation are avail-

able in DSC setup menu.

• Manual position/time setting (p. 16)

•Self-ID (MMSI code) indication (described in this sec-

tion)

■ ID input

A total of 100 ID codes can be programmed as “Ad-

dress ID” (for ships and coast stations) and “Group ID”

(for group stations). A pair of frequencies (both transmit

and receive) and ID name are also programmed to-

gether with the ID code which are used as call fre-

quencies when using the ID code.

SETTING PROCEDURES:

q During DSC menu indication, rotate [CH] to select

“Set up” then push [ENT] to select setup menu.

• The select screen is displayed as below.

w Rotate [CH] to select the “Address ID” or

“Group ID,” then push [ENT].

• The address/group ID list screen is displayed.

When the memory is full:

“Memory full” is displayed beside “<add>”

indication when 100 ID codes have been pro-

grammed.

Delete any unnecessary IDs in such cases (see p.

46 for delete).

e Rotate [CH] to select “<add>” then push [ENT].

• The address/group ID setup screen is displayed.

r Push the numeral keys to input the desired 10-digit

ID name, 9-digit code and both transmit and re-

ceive frequencies, then push [ENT].

• Rotate [CH] to move the cursor.

•When entering group code, enter “0 (zero)” for the ﬁrst

digit.

•The frequencies entered should be within the marine

frequency ranges as follows.

1.6– 2.9999 MHz 4.0– 4.9999 MHz

6.0– 6.9999 MHz 8.0– 8.9999 MHz

12.0–13.9999 MHz 16.0–17.9999 MHz

18.0–19.9999 MHz 22.0–22.9999 MHz

25.0–27.5000 MHz

t Push [ENT] to program the contents into the ad-

dress or group ID.

•

Returns to the address/group ID list screen automati-

cally.

•The ID list is displayed in alphabetical order for ID

name, so [CH] rotation may be necessary for the pro-

grammed ID conﬁrmation.

y Push [MODE

SET

] to return to DSC watch mode,

or push [FREQ/CH] to return to the select screen.

********

Set

********

------

Address

------

********

Set

********

-------

Group

-------

<add>

ICOM

M802

012345678

SEL

Cancel

********

Set

********

------

Address

------

********

Set

********

-------

Group

-------

Name:ICOM_M802_

ID:012345678

TX:_2345.0kHz

RX:_2345.0kHz

SEL

Cancel

********

Set

********

------

Address

------

********

Set

********

-------

Group

-------

Name:

†

_________

ID:0________

TX:_____._kHz

RX:_____._kHz

SEL

Cancel

********

Set

********

------

Address

------

********

Set

********

-------

Group

-------

<add>

SEL

Cancel

********

Set

********

--------

Select

--------

Address

Group

Call

frqeuency

Traffic

frqeuency

Scan

frqeuency

MMSI

check

SEL

IC-M802_USA.qxd 02.7.9 10:58 Page 44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-M802 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info