71
6
MEMORY CHANNELS
6
• Using [Simple] screen
q Click zYx(BANK) or zZx(BANK) to select a memory bank
to be programmed.
w Click zYx(MEMO) or zZx(MEMO) to select a pre-pro-
grammed memory channel to be programmed.
NOTE: During [Simple] screen, you cannot set or
change a receive frequency on a blank channel.
e Set a frequency, mode, etc. that you want to memorize.
r Click zMWx for 1 sec. to program the setting information
into the selected memory channel.
D Initializing the memory channel contents
The memory channel contents can be initialized using the
“preset_e.mch” file (which is saved in mch format).
q Click the zMemory Editx icon on the tool bar to call up the
[Memory Channel Editor] screen if it is not displayed.
w Click [Open...] in the [File] menu, then select
“preset_e.mch” that is contained in the “IC-
PCR1500_2500” folder to load.
• If the “preset_e.mch” file is overwritten or lose, copy it from the
supplied CD into the “IC-PCR1500_2500” folder.
- Right-click the copied file and select [Properties]. Then click
[Read-only] check box (no check mark) to cancel the read pro-
tection.
