17
6
SCAN OPERATION
■ Selecting scan edges
The scanning range can be set to all frequencies (full scan), a
selected band or between two user-programmed frequencies
(programmed scan).
The programmed scan edges can be programmed in the
same manner as programming regular memory channels.
Program the desired scan edge frequencies in a pair of
programmed scan edge channels in advance. (pgs. 12, 13)
q Select VFO mode with [V/M].
w While pushing [FUNC], push [BAND] to enter band edge
set mode.
e Rotate [DIAL] to select the desired scan edge.
•“ALL” for full scan, “BAND” for band scan or “PROG 0”–
“PROG24” for programmed scan.
r Push [BAND] to exit band edge set mode; or push [FUNC]
+ [Y] or [Z] momentarily to start the programmed scan
using the selected edges.
When scanning across the band as below (programmed
scan edges are set across the band), the parameters like
tuning step, receive mode, offset frequency, duplex direc-
tion, etc. are used in each bands’ VFO settings instead of
these scan edges.
