Bedienungsanleitung Icom IC-R8600 (Seite 21 von 96) (Englisch)

670434

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

BASIC OPERATION

3-13-1

L The status or position of each key or dial is stored and

recalled when the power is turned ON.

Rotate to adjust the volume level.

• While adjusting, the volume level is indicated in %.

Adjusting the volume level

About the VFO and Memory modes

z Push

V/M

to select the VFO or Memory mode.

Selecting the receiving mode

1. Touch the receiving mode icon. (Example: FM)

Mode key Receiving mode

[FM] FM

[WFM] WFM

[AM] AM ↔ S-AM(D)*

[SSB/CW] USB* ↔ CW*

[FSK] FSK*

[DIGITAL]

D-STAR→P25→dPMR→NXDN-

→NXDN-n→DCR→D-STAR

*Touch for 1 second to select other modes. See the table below.

Mode key Receiving mode

[AM]

S-AM(D)→S-AM(U)→S-AM(L)→S-AM(D)

[SSB/CW] CW ↔ CW-R, or USB ↔ LSB

[FSK]

FSK ↔ FSK-R

2. Touch to select the receive mode. (Example: AM)

L When the mode key is touched for 1 second, the

selectable modes differ. See the table below.

• Selectable modes when the mode key is touched

MODE screen

• Selectable modes when the mode is touched for 1 second

RF gain/SQL level/Audio tone

1. Push .

2. Touch an item to select. (Example: RF GAIN)

3. Rotate .

• Settable range RF GAIN (Sensitivity): 0 ~ 100%

SQL (Squelch): 0 ~ 100%

TREBLE (Higher tone): –15 to +15

BASS (Lower tone): –15 to +15

D Noise squelch

The Noise Squelch allows the audio to be heard only while

receiving a signal that includes less noise than a set level.

• Activates when the squelch level is set to between 30%

and 50% in the FM, AM, S-AM or DIGITAL mode.

• A higher level blocks weak signals. A lower level allows

you to hear weak signals including noise.

L While the squelch is closed, the noise audio is muted and

the [RECEIVE] indicator is OFF.

D S-meter squelch

The S-meter Squelch mutes the speaker sounds when the

signal strength is less than the set value.

• Activates when the squelch level is set to between 50% and

100% in any mode.

• The squelch level is indicated by the position of

“▼.”

When the received signal is stronger than the S-meter

squelch level designated by the “▼,” the squelch opens.

D RF gain

Normally, set the RF gain to maximum (100%).

• You can adjust the RF gain to decrease the interference or

noise from a nearby strong station.

• indicates that the RF gain is reduced.

L If a strong signal is received and (Overow)

appears, reduce the RF gain until

disappears.

VFO mode

You can set the receive frequency by rotating

MAIN DIAL

or by

directly entering it with the keypad

Memory mode

You can

set the receive frequency by

selecting a preset

channel. See Section 8 for details.

z Hold down

to forcibly open the squelch.

• [MONI] appears and [RECEIVE] lights.

You can change the function in the digital mode setting on

the MENU screen.

» SET > Digital Set > Digital Monitor

Monitor function

VFO mode Memory mode

Group No. Channel No.

V/M

S-meter squelch level

InformationL

When the squelch circuitry activates to emit the audio,

"Squelch opens." When the squelch circuitry mutes the

audio emission, "Squelch closes."

L You can chose the receiving mode icons that appears

when you touch the [DIGITAL] key.

» SET > Digital Set > Digital Mode Select

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom IC-R8600 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info