670150
268
Zoom out
Zoom in
Vorherige Seite
1/282
Nächste Seite
19-4
19
SPECIFICATIONS AND OPTIONS
Options
IC-PW1/EURO
Hf
/50
mH
z
all Band
1
k
w linear
amplifier
Full-duty-cycle 1 kW linear amplifier including an automatic
antenna tuner. Has automatic tuning and band selection ca-
pability when used with an Icom transceiver. Full break-in
(QSK) operation. The amplifier/power supply unit and the
remote control unit are separate.
SP-34
eXternal speaKer
4 audio filters, headphone jack, can be connected to 2 trans-
ceivers.
• Input impedance: 8
• Max. input power: 5 W
SM-50
desKtop micropHone
Unidirectional, dynamic micro-
phone for base station operation.
Includes [UP]/[DOWN] switches, a
low cut switch and mic gain con-
trol.
CT-17
ci-v level converter
For remote transceiver control
using a PC. You can change fre-
quencies, operating mode, mem-
ory channels, etc. (software is not
included)
HM-36
Hand micropHone
Hand microphone equipped with
[UP]/[DOWN] switches.
SP-33
eXternal speaKer
Designed for base station operation.
• Input impedance: 8
• Maximum input power: 5 W
RS-BA1
ip remote control software
To remotely control radios using the RS-BA1, BE SURE
that you comply with your local regulations.
SM-30
desKtop micropHone
Unidirectional, electret microphone
for base station operation. Includes
a low cut switch and mic gain con-
trol.
RC-28
remote encoder
For operating the RS-BA1
(version 1.3 or later) or using as a
remote control dial to operate the
transceiver.
* The LCD display may have cosmetic imperfections that appear as small or dark spots. This is not a malfunction or defect, but
a normal characteristic of LCD displays.
Spurious signals may be received near the following frequencies. These are made in the internal circuit and does not indicate
a transceiver malfunction.
• 0.150 MHz, 1.049 MHz, 19.660 MHz and 24.576 MHz
Spurious waveforms may be displayed on the Spectrum scope screen regardless of the transceiver’s condition (Tx or Rx). They
are made in the scope circuit. This does not indicate a transceiver malfunction.
268

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC7850 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info