Bedienungsanleitung Icom ID-51A (Seite 8 von 413) (Englisch)

689583

Zoom out

Zoom in

Vorherige Seite

1/413

Nächste Seite

2USING A microSD CARD

2-2

■About the microSD card

The microSD and microSDHC cards are not available

from Icom. User supplied.

A microSD card of up to 2 GB or a microSDHC of up to

32 GB, can be used with the ID-51A/E.

Icom has checked the operation with the following mi-

croSD and microSDHC cards.

(As of September 2016)

Brand Type Memory size

SanDisk®

microSD 2 GB

microSDHC

4 GB

8 GB

16 GB

32 GB

• The above list does not guarantee the card’s perfor-

mance.

• Through the rest of this document, the microSD and

a microSDHC cards are simply called microSD cards

or the cards.

• Icom recommends that you format all microSD cards

to be used with the transceiver, even preformatted mi-

croSD cards for PCs or other uses.

The following data can be stored onto the card:

• Transceiver data

Memory channel contents, Repeater List, Your (UR)

call sign memory and GPS memory that are stored in

the transceiver.

• Communication audio

The transmitted and received audio.

• Communication log

The communication and receive history log.

•

Automatic answering voice audio in the DV mode

Voice audio to use with the Auto Reply function in the

DV Mode.

• V

oice audio for the Voice TX function

Voice audio to use with the Voice TX function.

• Position data from the GPS receiver

Position and time data from a GPS receiver that is in a

log ﬁle as a route.

•

Voice Recorder

The microphone audio.

■Saving data onto the microSD card

NOTE:

• Before using the microSD card, read the microSD

card instructions thoroughly.

• If you do any of the following, the microSD card data

may be corrupted or deleted.

- Remove the microSD card from the transceiver

while accessing the microSD card.

- Change the external power source voltage while

accessing the microSD card.

- Start the vehicle engine while accessing the mi-

croSD card.

- Drop, impact or shake the microSD card.

• Do not touch the contacts of the microSD card.

• The transceiver takes a longer time to recognize a

high capacity microSD card.

• The microSD card will get warm if used continuously

for a long period of time.

• The microSD card has a certain lifetime, so data

reading or writing may not be possible after using it

for a long time period.

• When reading or writing data is impossible, the

microSD card’s lifetime has ended. In this case,

purchase a new one. We recommend that you oc-

casionally make a backup ﬁle of the important data

onto your PC.

• Icom is not responsible for any damage caused by

data corruption of a microSD card.

TIP: Occasionally saving the data is recommended.

Insert the card into the transceiver’s slot, and then

enter the Menu screen.

(MENU > SD Card > Save Setting) (p. 16-95)

Previous view

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom ID-51A Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Icom ID-51A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info