Bedienungsanleitung Icom ID-51E (Seite 329 von 413) (Englisch)

689584

329

Zoom out

Zoom in

Vorherige Seite

1/413

Nächste Seite

16 MENU SCREEN

16-74

Remote MIC Key

Function > Remote MIC Key

The function assignments for keys on the optional HM-75LS SPEAKER-MI-

CROPHONE can be changed for simple remote control operation.

• During RX/Standby:

Function Description

--- No function

UP Push to increase the frequency, Memory channel, repeater or

station call sign.

DOWN Push to decrease the frequency, Memory channel, repeater or

station call sign.

VOL UP Push to turn up the volume level.

VOL DOWN Push to turn down the volume level.

Monitor (Push) Hold down [SQL] to monitor the frequency. Release to stop moni-

toring.

Monitor (Hold) Push [SQL] momentarily to monitor the frequency and push mo-

mentarily again to cancel it.

CALL Push to select a call channel.

MR (000 CH) In the Memory mode, push to select memory channel 000.

MR (001 CH) In the Memory mode, push to select memory channel 001.

VFO/MR Push to toggle between the VFO mode and the Memory mode.

DR Push to select the DR function.

FROM (DR) In the DR function, push to select “FROM.”

TO (DR) In the DR function, push to select “TO.”

Home CH

Push to directly select the Home CH that is set to the selected

mode (VFO/Memory/DR).

While in the CALL CH or weather channel mode, or when no

Home CH is set, an error beep sounds.

BAND Push to select an operating band.

SCAN Hold down for 1 second to start a scan.

Push to stop the scan.

Temporary

Skip

Push to set the frequency to be skipped during scanning.

The selected frequencies are temporarily skipped during scan-

ning for faster scanning.

RX>CS

Hold down for 1 second to display the RX history.

- When the “[RX>CS] Key” item is set to “Call Sign Capture,” after

releasing the key, the last received call station’s call sign is set

to “TO” (destination).

- When the “[RX>CS] Key” item is set to “RX>CS List,” push [UP]/

[DOWN] to select a call sign, and then push this key again to set

to “TO” (destination).

- If [UP]/[DOWN] are not assigned, you cannot select the call sign

with the HM-75LS, even if the RX history is displayed.

SPEECH

Hold down for 1 second to announce the frequency, operating

mode or call sign.

- In the VFO, Memory and Call channel mode, the frequency and

the operating mode are announced.

- In the DR function, the call sign is announced. If Simplex is se-

lected, the frequency is announced.

Voice TX Push to transmit the voice audio recorded on the microSD.

Hold down for 1 second to repeatedly transmit the voice audio.

■Function items (Continued)

Volume level adjustment while

monitoring:

• When [VOL UP]/[VOL DOWN]

are assigned, push these keys to

adjust.

• When [VOL UP]/[VOL DOWN] are

not assigned, but [UP]/[DOWN]

are assigned, push these keys to

adjust.

• When [VOL UP]/[VOL DOWN]/

[UP]/[DOWN] are not assigned,

push []/[] to adjust, if [Moni-

tor (Push)] or [Monitor (Hold)] is

not assigned to []/[].

Default for “During RX/Standby”

Previous view

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom ID-51E Seite 329

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Icom ID-51E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info