Bedienungsanleitung Icom ID-51E (Seite 377 von 413) (Englisch)

689584

377

Zoom out

Zoom in

Vorherige Seite

1/413

Nächste Seite

17 OTHER FUNCTIONS

17-23

■CI-V information (Continued)

DCommand table

Cmd.

Sub

cmd.

Data Description

00 see p. 17-24 Send operating frequency for transceive

01 see p. 17-24 Send operating mode for transceive

03 see p. 17-24 Read operating frequency

04 see p. 17-24 Read operating mode

05 see p. 17-24 Send operating frequency

06 see p. 17-24 Send operating mode

07 Select the VFO mode

D0 Select A band

Dualwatch: Set the Main band as the A band

Single watch: Select the A band

D1 Select B band

Dualwatch: Set the Main band as the B band

Single watch: Select the B band

0C see p. 17-24 Read frequency offset*1

0D see p. 17-24 Send frequency offset

0F Read duplex setting

(10= simplex, 11= DUP–, 12= DUP+)

10 Set simplex operation

11 Set DUP– operation

12 Set DUP+ operation

11 00 Send/read attenuator OFF (AIR band)

30 Send/read 30 dB attenuator (AIR band)

14 01 see p. 17-24 Send/read audio output level

03 see p. 17-24 Send/read squelch level

0A see p. 17-24 Send/read RF power setting

0B see p. 17-24 Send/read external microphone gain.

16 see p. 17-24 Send/read VOX gain.

15 01 00 Read noise/S-meter squelch status (squelch

close)

01 Read noise/S-meter squelch status (squelch

open)

02 0000 to

0255 Read S-meter level (0000= S0, 0170= S9)

05 00 Read tone squelch and RF squelch status

(squelch close)

01 Read tone squelch and RF squelch status

(squelch open)

11 0000 to

0255

Read RF power meter

( 0005= S-LOW, 0026= LOW1, 0051= LOW2,

0128= MID, 0255= HIGH)

16 42 00 Send/read Repeater tone OFF

01 Send/read Repeater tone ON

43 00 Send/read Tone squelch OFF

01 Send/read Tone squelch ON

02 Send/read Reversed Tone squelch ON

46 00 Send/read VOX function OFF

01 Send/read VOX function ON

4B 00 Send/read DTCS OFF

01 Send/read DTCS ON

02 Send/read Reversed DTCS ON

59 00 Send/read Sub band OFF

01 Send/read Sub band ON

5B 00 Send/read DSQL/CSQL OFF (DV mode only)

01 Send/read DSQL ON (DV mode only)

02 Send/read CSQL ON (DV mode only)

5C 00, 01, 02 Send/read GPS TX mode

(00= OFF, 01= D-PRS, 02= NMEA)

5D 00 to 09 Send Tone setting

( 00= OFF, 01= TONE, 02= TSQL, 03=DTCS,

04=TSQL-R, 05=DTCS-R, 06=DTCS(T),

07=TONE(T)/DTCS(R), 08=DTCS(T)/TSQL(R)

09=TONE(T)/TSQL(R))

18 00 Turning the transceiver power OFF

01 Turning the transceiver power ON*2

19 00 Read transceiver ID.

Cmd.

Sub

cmd.

Data Description

1B 00 see p. 17-24 Send/read Repeater tone frequency

01 see p. 17-24 Send/read Tone squelch frequency

02 see p. 17-25 Send/read DTCS code and polarity

07 see p. 17-25 Send/read CSQL code (DV mode)

1C 00 00 Send/read Transceiver’s status (RX)

01 Send/read Transceiver’s status (TX)

1F 00 see p. 17-25 Send/read DV MY call sign

01 see p. 17-25 Send/read DV TX call signs

02 see p. 17-25 Send/read DV TX message

20 00 00 00*3Send/read Auto DV RX Call signs output OFF

01*3Send/read Auto DV RX Call signs output ON

01 see p. 17-26 Output DV RX Call signs

02 see p. 17-26 Read DV RX Call signs

01 00 00*3Send/read Auto DV RX message output OFF

01*3Send/read Auto DV RX message output ON

01 see p. 17-26 Output DV RX message

02 see p. 17-26 Read DV RX message

02 00 00*3Send/read Auto DV RX status output OFF

01*3Send/read Auto DV RX status output ON

01 see p. 17-25 Output DV RX status

02 see p. 17-25 Read DV RX status

03 00 00 Send/read Auto DV RX GPS/D-PRS data

output OFF

01 Send/read Auto DV RX GPS/D-PRS data

output ON

01 see p. 17-26

~ p. 17-28

Output DV RX GPS/D-PRS data for transceive

02 see p. 17-26

~ p. 17-28

Read DV RX GPS/D-PRS data for transceive

04 00 00 Send/read Auto DV RX GPS/D-PRS mes-

sage output OFF

01 Send/read Auto DV RX GPS/D-PRS mes-

sage output ON

01 see p. 17-28

Output DV RX GPS/D-PRS message for transceive

02 see p. 17-28

Read DV RX GPS/D-PRS message for transceive

22 00 see p. 17-28 Send/read DV TX data (Up to 30 bytes)

01 00 00 Send/read Auto DV RX data output OFF

01 Send/read Auto DV RX data output ON

01 see p. 17-28 Send/read DV RX data (Up to 30 byte)

02 00, 01

Send/read DV data TX setting (00=PTT, 01=Auto)

03 00, 01

Send/read DV fast data setting (00=OFF, 01=ON)

04 00, 01

Send/read GPS Data Speed setting

(00=Slow, 01=Fast)

05 00~10

Send/read TX Delay (PTT) setting

(00=OFF, 01=1 sec.

~ 10=10 sec.

)

*1: Less than 100 Hz is omitted.

*2: When sending the power ON command (18 01), the command

“FE” must be sent before the basic format.

• 19200bps: 50 • 9600bps: 26 • 4800bps: 14

• 1200bps: 5 • 300bps: 3

qwertu

F E

×14

68EFEE 1081

Example: When operating with 4800 bps

q Preamble code (ﬁxed) w Transceiver’s default address

e Controller’s default address r Command number

t Sub command number u End of message code (ﬁxed)

*3: Output setting is automatically turned OFF after turning the power

OFF, then ON.

Previous view

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom ID-51E Seite 377

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Icom ID-51E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info