Bedienungsanleitung Icom iM401EURO (Seite 3 von 32) (Englisch)

522353

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

TABLE OF CONTENTS

INSTALLATION NOTES

The installation of this equipment should be

made in such a manner as to respect the EC

recommended electromagnetic field expo-

sure limits (1999/519/EC).

The maximum RF power available from this

device is 25 watts. The antenna should be

installed as high as possible for maximum ef-

ficiency and that this installation height

should be at least 5 meters above ground (or

accessible) level. In the case where an an-

tenna cannot be installed at a reasonable

height, then the transmitter should neither be

continuously operated for long periods if any

person is within 5 meters of the antenna, nor

operated at all if any person is touching the

antenna.

In all cases any possible risk depends on the

transmitter being activated for long periods.

(actual recommendation limits are speciﬁed

as an average of 6 minutes) Normally the

transmitter is not active for long periods of

time. Some radio licenses will require that a

timer circuit automatically cuts the transmit-

ter after 1–2 minutes etc.

Similarly some types of transmitter, SSB,

CW, AM, etc. have a lower ‘average’ output

power and the perceived risk is even lower.

1 OPERATING RULES .......................... 1

2 PANEL DESCRIPTION .................. 2 – 4

■ Panel description ............................. 2

■ Function display ............................... 3

■ Microphone ...................................... 4

3 BASIC OPERATION ...................... 6 – 9

■ Channel selection ............................ 6

■ Receiving and transmitting .............. 8

■ Call channel programming ............... 9

■ Memory channel names .................. 9

4 DUALWATCH/TRI-WATCH ......... 10–11

■ Description ..................................... 10

■ Operation ....................................... 10

5 SCAN OPERATION ................... 12 – 13

■ Scan types ..................................... 12

■ Setting tag channels ...................... 13

■ Starting a scan ............................... 13

6 SET MODE ................................. 14–15

■ Set mode programming ................. 14

■ Set mode items .............................. 15

7 CONNECTIONS AND

MAINTENANCE ......................... 16 – 20

■ Unpacking ...................................... 16

■ Antenna ......................................... 16

■ Fuse replacement .......................... 16

■ Cleaning ......................................... 16

■ Connections ................................... 17

■ Mounting the transceiver ............... 18

■ Dimensions ..................................... 20

8 TROUBLESHOOTING ...................... 22

9 CHANNEL LIST ................................ 23

10 SPECIFICATIONS AND OPTIONS ... 24

■ Speciﬁcations ................................. 24

■ Options .......................................... 24

MB-69 TEMPLATE

0 IC-M401EURO_ (2).qxd 01.12.10 11:16 AM Page c (1,1)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom iM401EURO Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info