Bedienungsanleitung Icom MR1000TII (Seite 17 von 47) (Englisch)

30935

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

BASIC OPERATION

■ Ship speed indication

When the ship speed data with NMEA 0183 format is

applied, the radar can display the ship speed. Knots

(KT) or kilometers/hour (KM/h) are automatically se-

lected in the normal screen (p. 4) by selecting nautical

miles (NM) or kilometers (KM) respectively.

q Push [MENU]/[ ] several times to call up the

FUNCTION menu.

w Push [Ú] until the “DIST UNIT” section becomes

highlighted.

e Push [Ω ≈] to turn the ship speed indication to NM

or KM.

r Push [MENU]/[ ] several times to exit the menu

display or push [Ú] once to proceed to the position

display setting.

■ Position indication

When latitude/longitude data with NMEA 0183 format

is applied, the radar can display the latitude and longi-

tude of your ship’s or cursor position in the bottom of

the display. (To display the CURSOR position, bearing

data is necessary.) (p. 39)

q Push [MENU]/[ ] several times to call up the

FUNCTION menu.

w Push [Ú] until “POSN DISP” section becomes high-

lighted.

e Push [Ω ≈] to select the ship position or cursor po-

sition.

r Push [MENU] several times to exit the menu.

■ Waypoint indication

When waypoint data received from navigation equip-

ment with NMEA 0183 format is applied, the radar can

display the waypoint. To display the waypoint marker,

bearing data is necessary. (p. 39)

q Push [MENU]/[ ] several times to call up the

FUNCTION menu.

w Push [Ú] until the “WPT” section becomes high-

lighted.

e Push [Ω ≈] to turn the waypoint indication ON or

OFF.

r Push [MENU]/[ ] several times to exit the menu

display.

■ Long pulse function

To magnify the blips for easier viewing of small targets,

the long pulse and echo stretch (p. 11) functions are

available. When the long pulse is used in the

⁄

4 to

2 NM range, this function magniﬁes target echoes to

the backward direction of the target.

• Pulse selection

q Push [MENU]/[ ] several times to call up the

VIDEO menu. (p. 6)

w Push [Ú] until the “PULSE” section becomes high-

lighted.

e Push [≈] to select the long pulse.

r Long Pulse indication “” appears in the upper left

of the screen.

t Push [MENU]/[ ] several times to exit the menu.

■ Bearing setting

The radar bearing interface accepts NMEA, N+1 or

AUX data format and the bearing can use a magnetic

or true north type. When a true north type bearing is

used, the variation from magnetic north, etc., can be

adjusted on 0.1˚ steps.

D Setting the bearing type

q Push [MENU]/[ ] several times to call up the

FUNCTION menu.

w Push [Ú] until the “BRG” section becomes high-

lighted.

e Push [Ω ≈] to select magnetic or true north type.

• All displayed bearing readouts show the selected bear-

ing type.

D Setting the magnetic variation

q Push [MENU]/[ ] several times to call up the INT.

SETTING menu.

w Push [Ú] until the “MAG VAR” sections becomes

highlighted.

e Push [Ω ≈] to select an AUTO* or MANUAL varia-

tion.

r When a MANUAL variation is selected, push [Ú],

then push [Ω ≈] to set the bearing variation.

t Push [MENU]/[ ] to exit the menu display or

push [Ú] once to proceed to the bearing input set-

ting.

*NOTE: NMEA data is required for auto variation. NEVER

select “AUTO” variation without NMEA data, incorrect varia-

tion data may entered.

NOTE: Turn SP (Short Pulse) this function during

normal operation. This function reduces the target

distance resolution. (p. 23)

MR-1000R2_T2.qxd 04.2.24 10:22 Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom MR1000TII Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info