30935
23
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
ATA operation
Select the target which you want to track on the dis-
play.
q Push [Ù Ú Ω ≈] to move the + cursor on the de-
sired target.
w Push [TARGET]/[ ] for 1 sec. to select the tar-
get for tracking.
Dotted square symbol appears on the cursor.
Target identication number, bearing, distance readout,
course (CSE), speed (SPD), CPA and TCPA appear in
the information screen.
Timer starts to count the progressing time.
The vector appears on the target, after the progressing
time of 20 sec. has passed.
It changes to the circle display of a solid line and a vec-
tor display, and tracking operation is decided, after the
progressing time of one min. has passed.
When the target which is following disappears, a mark
changes to a lozenge and is blinked. A mark disappears
after one min..
When a target advances within a setting value, a mark
changes to a triangle, blinks and sounds alarm sound.
Alarm sound will be cancelled if one of key is pushed.
To cancel the target setting, move the cursor on the tar-
get, then push [TARGET]/[ ] for 1 sec.
[TARGET]/[ ] is pushed for changing the display of
EBL/VRM etc. to target information.
In order to choose target which displays information,
cursor is united with target and [TARGET]/[] is
pushed.
Plotting marks There are 5 kinds of plotting marks.
: Selected, uncalculated mark.
: Selected, calculated mark.
: Normal, calculated mark.
: CPA/TCPA alarm mark. The target is
close to within a minimum range and
time. Alarm emit indicator. Push [TAR-
GET]/[ ] to cancel the alarm.
: When the tracking of a target disap-
pears.
Course and speed vector
The vector indicates the targets predicted, true or rel-
ative course and speed.
Vector time may change depending on the TRAIL TIME set-
ting. (see VIDEO menu, p. 6)
The tip of the vector shows the targets predicted position
after a certain time, which has been selected in the TRAIL
TIME.
Vector
Current position
Vector time
Targets predicted
positon
NEW
BRG
CSE
CPA
DIST
SPD
TCPA
No.10
BRG 305.7T
0:20
CSE 081.3T
CPA 5.9NM
DIST 11.43NM
SPD 12.3KT
TCPA 0:50
Identification No.
Bearing
Course
Distance
Speed
Passage of time
Closest Point of
Approach
Time to Closest Point of
Approach
ATA (Automatic Tracking Aid)
19
7
MR-1000R2_T2.qxd 04.2.24 10:22 Page 19
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom MR1000TII wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info