Bedienungsanleitung ICU Eve (Seite 22 von 24) (Englisch)

666836

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Eve model 2017 (2.0) manual | Version 1.0 | July 2017

ENGLISH

APPENDIX 2: DEFAULT CONFIGURATION

OF OPTIONAL FACTORY SETTINGS

The Eve charging station has the following smart charging

options:

1. Standard load balancing: the charging station divides

 

2. Active load balancing: similar, but expanded with the

ability to communicate with the smart meter (in your

charging station or indoor). The charging station takes

actual energy consumption and the maximum

capacity of your grid connection into account.

To simplify the order process for smart charge features,

-

tion. This appendix provides an overview of these settings.

If your installation deviates from the applicable standard

settings below, please use the Service Installer to optimally



Standard Load balancing

Model Max. current

per phase, per

socket

Max. current

(Station-

MaxCurrent)

904461011 16 A 25 A power supply

904461001 32 A 40 A power supply

904461002 16 A

25 A total for both

power supplies

904461012 32 A

40 A total for both

power supplies

Standard Load balancing

Installation requirements:

• The Alfen charging station is equipped with an active

load balancing feature activated over P1 port

• Communication cable with RJ11 plugs

• Smart meter with available P1-port

– Communication with DSMR4.0 or higher

The charging station and the smart meter communicate

with each other over the P1 port using the DSMR protocol

(version 4.0 or higher). Data about the actual consumption

and charging needs is regularly exchanged. Whenever smart

meter capacity is limited, the charging station will apply

load balancing to manage the connected vehicles. This

prevents the charging station from overloading, or prevents



features provides for ‘peak shaving’, managing the power

supply during peak moments.

If the P1 port of the smart meter is already being used by

another device, a splitter can be used.

NOTICE!

Not all splitters are compatible. Using splitters with two

cables may prevent your charging cable from being able to

communicate with the smart meter.





• 

standard load balancing. This limits the maximum

current(s) on the circuit(s) of the charging station.

• Installation-MaxCurrent: This is the capacity of your grid



grid operator.

The table below show the standards settings for the

parameters mentioned:

Active

Load

Balancing

on 1-phase

connection

Active

Load

Balancing

on 3-phase

connection

Product

with max

input

current

Socket

side

Adopted

settings

32A per

phase

2x3.7kW

2x11kW

Station-

MaxCurrent

32 25

Installation-

MaxCurrent

40 35

2x32A

per phase

2x7.4kW

2x22kW

Station-

MaxCurrent

40 40

Installation-

MaxCurrent

63 63

Are these value inconsistent with yours? The technician

can use the Service Installer to modify these settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ICU Eve Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ICU Eve

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info