Main Device Parameters
Output Power: 12W*2
Frequency Response: 80Hz-16kHz
RMS: 24W(THD=10%)
Driver: 3"*2
Power Supply: DC 14V 1A
Distortion: <0.5%
S/N: >65dB
Battery Capacity:11.1V 2000mAh
Battery Play Time: 3—4hours
Battery Charging Time: 2—2.5 hours
Product Size: L260*W150*H150mm
Product Weight: 2.1kgs
1. Speaker
2. User Manual
3. Adapter DC14V 1A
4. 3.5mm Audio Cable
1. Place speaker within 30ft of the Bluetooth-enabled device.
2. Slide the ON/OFF button to ON. The blue LED ashes 3 times slowly, then ashes quickly to indicate Bluetooth pairing mode.
3. Follow the instructions of your device to search for the speaker.
4. The speaker is called "ACDC Classic" If a PIN is required, enter "0000."
5. The blue LED ashes when pairing is complete.
To turn the speaker on, press the ON/OFF button to ON.
The speaker beeps and a blue LED ashes slowly.
The blue LED stays on when playing music.
To reduce the risk of electric shock, do not attempt to disassemble the device.
Do not use this product in an aircraft or in a hospital.
Do not expose the device to direct sunlight, heat or ame.
The device may become warm while charging.
Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Charging: Red LED on
Fully Charged: Red LED off
Pairing Mode: Blue LED ashes quickly
Connected: Blue LED on
Playing: Blue LED stays on
1. Plug the adapter cable into the port of the speaker.
2. The red LED turns on to indicate that the unit is charging.
3. Once fully charged, the red LED turns off.
Features and Specications Package Contents
Pairing the Device
Basic instructions
Safety information
Caution
LED indicator
Charging the Speaker
Before using the speaker for the rst time charge it for at least 24 hours.
