EN
30
5. Insert the memory card into the slot as shown on
card slot.
6. Reinstall the rubber cover.
7. Attach carefully the back cover to the phone
until you hear it clicking at place and then screw it
firmly.
8. Check the cover tightness.
Charging the battery
ATTENTION: Due to the robust design is for
charging your phone must use a special cable
with extended microUSB plug!
Before putting your phone into service you must
recharge its battery.
1. Connect the adapter into the charger. Make sure
that the adapter is inserted in the correct position.
Do not use the force when connecting a plug.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the
phone from the charger.
Switching the phone on / off / sleep mode
Make sure that the phone has a SIM card and the
battery is fully charged.
Press the ON button to switch on the phone.
Switch off the phone by pressing ON and select
OFF. Confirm it by pressing OK.
Press shortly ON button to switch the phone over to
the sleep mode.
