60
Unsatisfactory drying result
Problem Possible causes What to do
The dishes are not
drying
Improper loading Load the dishwasher as suggested in the directions.
Too little rinse-aid Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Dishes are removed
too soon
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once the
dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
Wrong program
has been selected
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Use of cutlery with
a low-quality coating
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Error codes
When some malfunctions come on, the appliance will display error codes to warn you:
Codes Meanings Possible causes
E1 Longer inlet time. Tap is not opened, or water intake is restricted, or
water pressure is too low.
E3 Longer heating time,
but not reaching required
temperature
Malfunction of temperature sensor or of heating
element.
E4 Overfilled. Too much inlet water.
E6 Failure of temperature
sensor
Open circuit or break of temperature sensor
E7 Failure of temperature
sensor
Short circuit or break of temperature sensor
• If overflow occurs, turn off the main water supply before calling a service.
• If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
WARNING:
