Bedienungsanleitung Ignis ARL 14DS1 (Seite 7 von 148) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

806373

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

children - risk of suffocation. The

appliance must be disconnected

from the power supply before any

installation operation - risk of electric

shock.

During installation, make sure the

appliance does not damage the

power cable - risk of fire or electric

shock. Only activate the appliance

when the installation has been

completed.

Be careful not to damage the

floors (e.g. parquet) when moving

the appliance. Install the appliance on

a floor or support strong enough to

take its weight and in a place suitable

for its size and use. Make sure the

appliance is not near a heat source

and that the four feet are stable and

resting on the floor, adjusting them

as required, and check that the

appliance is perfectly level using a

spirit level. Wait at least two hours

before switching the appliance on, to

ensure that the refrigerant circuit is

fully efficient.

WARNING: When positioning the

appliance, ensure the supply cord is

not trapped or damaged.

WARNING: To avoid a hazard

due to instability, positioning or fixing

of the appliance must be done in

accordance with the manufacturer

instructions.

It’s forbidden to place the

refrigerator in such way that the

metal hose of gas stove, metal gas or

water pipes, or electrical wires are

in contact with the refrigerator back

wall (condenser coil).

All dimensions and spacing needed

for installation of the appliance are in

the Installation Instruction booklet.

Please remove the power cord from

condenser hook during installation

before connecting product to power

supply.

ELECTRICAL WARNINGS

It must be possible to disconnect

the appliance from the power

supply by unplugging it if plug is

accessible, or by a multi-pole switch

installed upstream of the socket in

accordance with the wiring rules

and the appliance must be earthed

in conformity with national electrical

safety standards.

Do not use extension leads,

multiple sockets or adapters. The

electrical components must not

be accessible to the user after

installation. Do not use the appliance

when you are wet or barefoot.

Do not operate this appliance if it has

a damaged power cable or plug, if it

is not working properly, or if it has

been damaged or dropped.

If the supply cord is damaged, it

must be replaced with an identical

one by the manufacturer, its service

agent or similarly qualified persons

in order to avoid a hazard - risk of

electric shock.

WARNING: Do not locate

multiple portable socket-outlets or

portable power supplies at the rear

of the appliance.

CLEANING AND

MAINTENANCE

WARNING: Ensure that the

appliance is switched off and

disconnected from the power supply

before performing any maintenance

operation; never use steam cleaning

equipment - risk of electric shock.

Do not use abrasive or harsh

cleaners such as window sprays,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ignis ARL 14DS1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info