Bedienungsanleitung Ignis GS 09Q60 (Seite 7 von 10) (Englisch)

806394

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

DAILY USE

SWITCHING THE HOB ON/OFF

To turn the hob on, press the power button for around 1 second.

To turn the hob o, press the same button again, and all cooking zones will

be deactivated.

POSITIONING

Locate the desired cooking zone by referring to the position symbols.

Do not cover the control panel symbols with the cooking pot.

Please note: In the cooking zones close to the control panel, it is advisable to

keep pots and pans inside the markings (taking both the bottom of the pan

and the upper edge into consideration, as this tends to be larger).

This prevents excessive overheating of the keypad. When grilling or frying,

please use the rear cooking zones wherever possible.

ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING

POWER LEVELS

To activate the cooking zones:

Select the pre-selected cooking zone by pressing the corresponding zone

selection button. The display will show level ”0”.

Each cooking zone has dierent power levels that can be adjusted using

the ”+”/”−” buttons, from a minimum of 1 to a maximum of 9.

Some cooking zones have a fast heating function (Booster), shown on the

display with the letter “P“.

Power indicator display

Selected cooking zone indicator

To deactivate the cooking zones:

Select the cooking zone to be switched o by pressing the corresponding

zone selection button (a dot will light up on the display, to the power level

indicator's bottom right). Press the “−“ to set the level to “0“.

To switch o immediately, press and hold the zone selection button for

3seconds. The cooking zone is deactivated and the residual heat indicator

”H” appears on the display.

CONTROL PANEL LOCK

To lock the settings and prevent it from being switched on accidentally,

press and hold the Child lock button for 3seconds. A beep and a warning

light above the symbol indicate that this function has been activated. The

control panel is locked except for the switching o function ( ). To unlock

the controls, repeat the activation procedure.

TIMER

The timer enables a cooking time to be set for all of the zones.

To activate the timer:

Select and activate the cooking zone for which you wish to set the timer.

Press the button with the clock icon and set the desired time, using the ”+”

and ”−” buttons. The timer LED for the zone in use will be illuminated.

A few seconds after the last touch, the timer will start the countdown and

the dot on the display that indicates that the seconds are passing will ash.

When the set time is up, an acoustic signal will sound and the cooking

zone will switch o automatically.

After selecting the zone and the clock icon, the time can be changed at

any point, and several timers can be activated simultaneously.

The timer always shows the time set for the selected area, or the shortest

remaining time.

When more than one timer is active, the ashing LED indicates the zone for

which the cooking time is visible on the display.

To set the timer for another zone, repeat the above steps.

To deactivate the timer:

Select the cooking zone for which you wish to deactivate the timer.

Press the button with the clock icon ( )

for 3seconds. Alternatively, press

the button with the clock icon and then press and hold the ”−” button until

the display shows ”0:0”.

INDICATORS

RESIDUAL HEAT

If “H“ appears on the display, this means that the cooking zone is hot. The

indicator lights up even if the zone has not been activated but has been

heated due to the adjacent zones' use or because a hot pot has been

placed on it.

When the cooking zone has cooled down, the ”H” disappears.

POT INCORRECTLY POSITIONED OR MISSING

This symbol appears if the pot is not suitable for induction cooking, is not

positioned correctly or is not of an appropriate size for the cooking zone

selected. If no pot is detected within 30seconds of making the selection,

the cooking zone switches o.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ignis GS 09Q60 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ignis GS 09Q60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info