Bedienungsanleitung iHealth BP7 - Sense (Seite 1 von 5) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

783877

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Wireless Blood Pressure Wrist Monitor (BP7)

QUICK START GUIDE

Thanks for your purchase. This Quick Start Guide tells you how

to set up your iOS device, connect to Bluetooth, and measure

your blood pressure. Please follow the instruction below to start

your measurement process.

First Time Set Up Instructions

Download the Free iHealth MyVitals App

Prior to ﬁrst use, download and install

"iHealth MyVitals" from the App Store.

Account Set Up and Registration

Follow the on-screen instructions to register and set up your

personal account.

Charge Battery Prior First Time Use

Connect the monitor to a USB port using

the charging cable provided until the green

indicator light stabilizes.

Connect to iOS Device via Bluetooth

• Apply the cuff or press the START/STOP button, the Bluetooth

indicator will begin ﬂashing.

• Turn Bluetooth "On" under the "Settings" Menu on the iOS

device.

• Wait until the model name printed on the monitor, (i.e. "BP7

xxxxxx") and "Not Paired" appear in the Bluetooth menu, and

select the model name "BP7 xxxxxx" to pair and connect. The

Bluetooth indicator will remain steady upon successful

connection. When using the monitor for the ﬁrst time, it may take

up to 30 seconds for your iOS device to detect the Bluetooth

signal.

• Each subsequent time you use the monitor, "Not Connected" will

be displayed next to "BP7 xxxxxx" in the Bluetooth Menu.

• Please repeat these steps when you switch to another iOS

device with the monitor.

Measurement Procedures

Blood pressure can be affected by the position of the cuff and

your physiologic condition. It is very important that you keep your

wrist at heart level.

1. Be seated with your feet ﬂat on the ﬂoor without crossing your

legs. Stay still during measurement. Do not move your wrist,

body, or the monitor.

2. Place your hand palm-side up in front of you and wrap the cuff

around a bare wrist 1/2" (1-2cm) above the wrist joint. If the

monitor is

correctly placed, iHealth logo will be facing upright.

3. The middle of the cuff should be at the level of the right atrium

of your heart.

Waiting to connect Flashing blue light

Connected and measuring Steady blue light

Measurement completed and

ready to disconnect

Gradually extinguishing light

Monitor Status

Bluetooth Indicator

4. It is advised to place the monitor’s travel case under your arm

for support and to keep your arm at optimal height for measure

ment.

5. Adjust the height of your wrist, the App will detect your wrist

position and the measurement will start ONLY when the correct

position is detected. Follow the on-screen instructions to begin

measurement.

Auto Connect Option

Auto connect option allows the monitor to ﬁnd the last used iOS

device and re-establish the connection with your iOS device

automatically. Auto connect option can be enabled in the App.

(Device Setting->Auto Connect->On)

Taking Measurements with Multiple iOS Devices

Turn off the Bluetooth on the last used iOS device if the Auto

Connect option is enabled in your App, then follow the set up

instructions in the Quick Start Guide.

Measuring without an iOS Device

Enable the Ofﬂine Measurement function on the App. (Device

Setting->Ofﬂine Measurement->On) Apply the cuff, follow the

measurement Procedures, and then press the "START/STOP"

button to begin measurement. All ofﬂine measurements will be

uploaded to the App automatically upon the next successful

Bluetooth connection.

For detailed operating instructions, please visit

www.ihealthlabs.com.

Note: Physical activity including eating, drinking, and smoking as

well as excitement, stress,and many other factors inﬂuence blood

pressure results.

ATTENTION: You can stop the measurement process at any time

by pressing and holding the "START/STOP" button for 2 seconds.

Visit www.ihealthlabs.com to obtain additional product

information. For Customer Service, please call

+1-855-816-7705.

iHealth

1/2" (1-2cm)

iHealth

START

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

iHealth BP7 - Sense Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von iHealth BP7 - Sense

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info