Bedienungsanleitung IHS Air Cooler PLUS A4024 (Seite 3 von 11) (Englisch)

517381

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Maintenance

The Air Cooler PLUS is made of sturdy ABS material. Always unplug the power

cord from the wall socket first if any malfunction should occur.

• Drain the water reservoir if cooler is not being used,

and dry the unit in a well-ventilated place. To drain

the unit, remove the plug at the bottom of the unit

in bathroom or water-friendly place.

• After draining, please make sure the inside is

completely dried. To speed up drying, you may

turn on the Air Cooler and press “HIGH” speed

switch. It takes about an hour for the unit to completely dry.

• Offensive odor or weak air flow:

The HEPA filter may be full. If not changing filter,

remove filter and shake over newspaper to remove

dust or use sweeper attachment to suction out dust.

• External maintenance:

Please wipe with soft cloth and a non-abrasive detergent.

• If the power cord is damaged, or the unit doesn’t work properly, it must be fixed

by an authorized agent or a similarly qualified person in order to avoid a hazard.

Do not immerse whole unit in water. It might cause the breakdown or

electrical shock if the PC board or other electrical components get wet.

The usage of a chemical solution, such as a volatile oil or bleaching,

may result in damage to the ABS casing.

If the unit is not completely dried before storage, the humidity

enclosure of the unit provides a living environment for bacteria.

Questions & Answers

Q. Why is my Air Cooler is not blowing out cool air?

A. Please fill water reservoir with very cold water. If the water you fill is the

same temperature as the outside air, you may place ice cubes in the reservoir.

Q. The airflow is weak, what can I do?

A. Please check to see if the HEPA filter is full. For cleaning or changing the filter

you may read the maintenance section for reference.

Q. Nothing is happening - why is my unit not turning on?

A. Please check to make sure the plug is connected to the wall socket. If the power is

off via Timer, please turn on the power switch for normal operation.

READ

THIS ENTIRE MANUAL

BEFORE USING

ANY OF THE FUNCTIONS.

1. To use as a fan and air filter: Simply press power button ON and adjust

SPEED and SWING controls to your requirements. The HEPA filter is in place

to remove 99.97% of particles from the air.

2. T

o use as a waterless air cooler and air filter. This involves the exclusive

Cooling Chamber and Gel Packs, found on no other air coolers. The two (2)

rectangular Gel Packs must go in the freezer for approximately 2 hours. When

the Gel Packs are frozen, place them in the cooling chamber (see diagram on

pg. 3). (Keeping a spare set of Gel Packs in the freezer will guarantee you will

always have a cold Gel Pack to swap out when necessary. To order additional

Gel Packs, refer to your place of purchase or call 1-800-839-0966.) Then

press the power ON button and adjust the SPEED and SWING controls. The

HEPA filter is in place to remove 99.97% of particles from the air and the cool-

ing chamber will lower the temperature without increasing humidity.

3. To use the air cooler with water and air filter. Add water to the water inlet (see

diagram on pg. 3). Use very cold water. There are two (2) small plastic Ice

Pods that can be placed in your freezer for a few hours, then added to the water

in the water reservoir. These Ice Pods will keep the water cold much longer.

The colder the water, the cooler the air will be. Once the water and optional

Ice Pods are added, just press the power ON button, and then the COOL but-

ton. Adjust the SPEED and SWING controls.

The HEPA filter is in place to remove 99.97% of particles in the air.

4. To use the air cooler as humidifier and air filter. Add water to the water reser-

voir through the water inlet (see diagram on pg. 3), press Power ON button,

then COOL button. The Air Cooler PLUS will add humidity to dry air during

winter months or in low humidity areas. In this case, the water does not need

to be cold.

The HEPA filter is in place to remove 99.97% of particles from the air.

Again, please read this complete manual carefully before using any of the

above functions to get maximum service life from your Air Cooler PLUS.

➟

Lift up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

IHS Air Cooler PLUS A4024 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info