Bedienungsanleitung Iiyama PROLITE T1732MSC (Seite 20 von 35) (Englisch)

509930

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

ENGLISH

16 OPERATING THE MONITOR

SCREEN ADJUSTMENTS



The screen adjustments described in this manual are designed to set image position and minimize

ﬂ icker or blur for the particular computer in use.



ProLite T1532MSC is designed to provide the best performance at resolution of 1024 × 768, but can

not provide the best at resolutions of less than 1024 × 768 because the picture is automatically

stretched to ﬁ t the full screen. It is recommended to operate at resolution of 1024 × 768 in normal use.



ProLite T1732MSC and ProLite T1932MSC are designed to provide the best performance at

resolution of 1280 × 1024, but can not provide the best at resolutions of less than 1280 × 1024

because the picture is automatically stretched to ﬁ t the full screen. It is recommended to operate at

resolution of 1280 × 1024 in normal use.



Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to

the screen enlargement process.



It is preferable to adjust the image position and frequency with the monitor controls, rather than

the computer software or utilities.



Perform adjustments after a warm-up period of at least thirty minutes.



Additional adjustments may be required after the Auto Adjust depending on the resolution or signal timing.



The Auto Adjust may not work correctly when displaying the picture other than the screen

adjustment pattern. In this case, manual adjustments are required.

There are two ways to adjust the screen. One way is automatic adjustment for H/V-POSITION,

H-SIZE and FINE. The other way is performing each adjustment manually.

Perform the Auto Adjust ﬁ rst when the monitor is connected to a new computer, or resolution is

changed. If the screen has a flicker or blur, or the picture does not fit in the display area after

performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by

using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.

com).

Adjust the image by following the procedure below to get the desired picture.

This manual explains adjustment under Windows

OS.

Display the picture at the optimum resolution.

Enter the Test.bmp (screen adjustment pattern) to wallpaper.



Consult the appropriate documentation for doing this.



Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in

the wallpaper setting dialogue box. If you use Microsoft

PLUS! 95/98 cancel the

setting of “Stretch desktop wallpaper to ﬁ t the screen”.

[Adjustment pattern]

Zebra pattern

Color bar

Picture frame

NOTE

Adjust the image by following the procedure below to get the desired picture when selecting Analog input.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Iiyama PROLITE T1732MSC Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Iiyama PROLITE T1732MSC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info