Bedienungsanleitung Ikea 303.831.44 Kulinarisk (Seite 11 von 64) (Deutsch, Englisch, Französisch, Italienisch)

764366

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

What to do if...

If there is a fault, first try to find a solution

to the problem yourself. If you cannot find a

solution to the problem yourself, contact an

authorized service center.

If you operated the appliance wrongly,

or the installation was not carried out

according to the Assembly instructions, the

visit from the Authorized Service Centre

technician may not take place free of

charge, even during the warranty period.

Before contacting the Authorized Service Centre:

Switch the appliance on again to see if the problem has disappeared. If not, switch it off

again and repeat the operation after an hour.

If your appliance still does not work properly after carrying out the checks listed in the trou-

bleshooting guide and switching the appliance on again, contact the Authorized Service

Centre, clearly explaining the problem and specifying:

• the type of fault;

• the model;

• the type and serial number of the appliance (given on the rating plate).

PROBLEM POSSIBLE CAUSE SOLUTION

Appliance not stable. The appliance is not correctly installed. Follow the Installation instruction enclosed to the ap-

pliance.

Appliance is not in horizontal

position. The appliance is not correctly installed. Follow the Installation instruction enclosed to the ap-

pliance.

Performance in terms of oil capture

are not satisfying.

Oil and grease on metal lters or

charcoal lters.

Follow the cleaning frequency of lters as described in

the user manual.

Appliance does not work. The appliance is not correctly con-

nected.

Verify that the main cable is connected to the motor

group or the plug is connected to the socket.

The light does not work. The LED is broken. For replacement, contact the Authorized Service Centre.

Noise of hood is higher than

customer expectation.

Air outlet diameter in the wall is too

small, causing a pressure drop and an

increase in motor speed.

Follow the Installation instruction enclosed to the ap-

pliance.

Product is installed in recirculation

mode.

Product in recirculation mode(and using a charcoal lter)

will generate an higher noise than a product in extration

mode.

More than one bend in the ventilation

duct.

If the exhaust system in the building has multiple bend

in or a long distance, this can increase the noise of the

product.

Button A light ashing once per

second. Grease lter alarm.

Please clean grease lter and reset alarm. Refer to care

and cleaning guide for maintenance and control panel

guide to reset the lter alarm.

Button A lights ashing twice per

second. Charcoal lter alarm.

Charcoal lter alarm. Please clean charcoal lter and

reset alarm. Refer to care and cleaning guide

for maintenance and control panel guide to reset the

lter alarm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ikea 303.831.44 Kulinarisk Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ikea 303.831.44 Kulinarisk

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info