Bedienungsanleitung Ikea 804.619.45 Starkvind (Seite 5 von 92) (Alle Sprachen)

764383

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

IMPORTANT:

STARKVIND air purier can be used as a standalone

device and also works together with TRÅDFRI

Gateway and the IKEA Home smart app.

QUICK GUIDE

IfyouhaveanIOSdevice:

Go to the App Store and download the IKEA Home

smart app. The app will take you through the

process of adding STARKVIND air purier to your

TRÅDFRI Gateway.

IfyouhaveanAndroiddevice:

Go to Google Play and download the IKEA Home

smart app. The app will take you through the

process of adding STARKVIND air purier to your

TRÅDFRI Gateway.

Pairing: Adding STARKVIND air purier to your

TRÅDFRI Gateway.

STARKVINDairpuriertable:

You will nd the pairing button by removing the

tabletop.

• The range between the gateway and the receiver

are measured in open air.

• Dierent building materials and placement of the

units can aect the wireless connectivity range.

• If the app can't connect your air purier to the

gateway, then try to move the air purier closer to

your gateway.

Fan speed control

The fan speed can be regulated between 1 to 5 and

Auto mode.

Auto mode

In Auto mode, the product selects the fan speed in

accordance with the ambient air quality.

The air quality sensor is active and measures PM 2.5

particles when the air purier is running.

Only in the IKEA Home smart app.

Indicators for air quality (PM 2.5):

Green: 0-35 / Good

Amber: 36-85 / OK

Red: 86- / Not good

• Operational temperature: 0°C to 40°C.

• Humidity when operational: 10 to 60% RH

(Recommended operational humidity: 40-60% RH)

When STARKVIND air purier is connected to the

mains for the rst time, the LED lights on the

control panel light up in succession. When the LED

lights stop illuminating, the product is ready to use.

Press the control knob to put it in Auto mode, or

turn to the desired level. Press the knob again to

turn it o.

A long press activates the Control lock. It can also

be controlled from the app IKEA Home smart.

Care instructions

Unplug the product before cleaning.

To clean the product, wipe with a soft damp cloth.

Use another soft dry cloth to wipe dry.

Vacuum clean the pre-lter regularly.

Note!

Never use abrasive cleaners or chemical solvents

since these can damage the product.

Cleaningtheairqualitysensor

Vacuum clean the air quality sensor regularly.

Filter replacement

When replacing the lter, it is essential that the user

proceeds as follows:

One LED light illuminated on the control panel

indicates that you should check your lters.

AUTO

Warning!

The power supply cord must be disconnected

during lter replacement!

1. Disconnect the power and wait until the fan has

stopped.

2. Remove the pre-lter and clean the pre-lter with

a vacuum cleaner or with water depending on

how dirty it is.

3. Remove lter(s), and handle used lters carefully.

Dispose of the lter(s) in accordance with local

environmental regulations for waste disposal.

4. Clean the inside, removing all dust and dirt.

5. Insert the new lter(s). (Touch only the frame of

the gas lter).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ikea 804.619.45 Starkvind Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ikea 804.619.45 Starkvind

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info