Bedienungsanleitung Ikea 805.484.54 Kallboda (Seite 9 von 44) (Englisch)

817521

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

During the drying phase moisture from the interior of the

dishwasher is stored in the mineral and heat energy is re-

leased. The heat energy is blown out into the interior of the

dishwasher with dry air. This speeds up and improves dry-

ing.

This drying method saves a great deal of energy.

Tip:To avoid impairing the drying performance, do not posi-

tion items of tableware directly in front of the intake open-

ing or the blow opening of the container.

Do not position heat-sensitive items of tableware directly in

front of the blow opening of the container.

→"Appliance", Page11

Aqua sensor

The aqua sensor is an optical measuring device (light bar-

rier) which measures the turbidity of the washing water. You

can save water with the aqua sensor.

Use of the aqua sensor depends on the programme. If the

soiling level is high, the rinsing water is drained off and re-

placed with fresh water. If the soiling level is lower, the rins-

ing water is used in the next wash cycle, so reducing water

consumption by 3-6 litres. In the automatic programmes the

temperature and running time are additionally adjusted to

the level of soiling.

Sensors

The sensors adjust the programme sequence and strength

in the automatic programmes depending on the level and

type of soiling.

The sensor has different sensitivity settings that can be

changed in the basic settings.

SENSOR SETTING DESCRIPTION

SE:00 Optimum setting for a mixed load

and heavily soiled tableware.

Saves both energy and water.

SE:01 Adjusts the programme strength

for effective removal of food rem-

nants even with low soiling levels.

Energy and water consumption

are adjusted accordingly.

SE:02 Adjusts the programme strength

for difficult conditions of use, e.g.

stubborn dried-on food remnants.

Recommended setting when using

organic or ecological detergents

containing low levels of active

agents. Energy and water con-

sumption are adjusted accord-

ingly.

Installation and connection

To ensure proper operation, connect the appliance to the

power and water supply correctly. Observe the specified cri-

teria and the installation instructions.

Scope of supply

After unpacking all parts, check for any damage in transit

and completeness of the delivery.

If you have any complaints, contact IKEA or our Customer

Service.

Note:The appliance has been tested at the factory to check

it is in working order. It is possible that water has left marks

on the appliance. These marks will disappear after the first

wash cycle.

The delivery consists of the following:

●Dishwasher

●Operating instructions

●Installation Instructions

●Installation material

●Steam guard plate

●Salt filling aid funnel

●Mains cable

Installing and connecting the appliance

You can position your built-under or integrable appliance in

a fitted kitchen between wooden and plastic walls. If you

subsequently install your dishwasher as a free-standing ap-

pliance, you must stop it from tipping over, e.g. by screwing

it to the wall or installing it under a continuous worktop that

is securely connected to adjacent cabinets.

1. "Follow the safety instructions." →Page4

2. "Follow the instructions for electrical connection."

→Page10

3. Check the Scope of supply and the condition of the appli-

ance.

4. Consult the installation instructions for the installation di-

mensions required.

5. Make the appliance level using the height-adjustable feet.

Make sure that the appliance is standing on the floor se-

curely.

6. "Install the drainage connection." →Page9

7. "Install the drinking water connection." →Page9

8. Connect the appliance to the power supply.

Drainage connection

Connect your appliance to drainage connection so dirty wa-

ter is discharged via the wash cycle.

Installing the drainage connection

1. Consult the installation instructions supplied for the steps

required here.

2. Connect the wastewater hose to the outlet connection of

the siphon using the enclosed parts.

3. When doing so, check that the wastewater hose is not

kinked, crushed or twisted.

4. Also check that there is no cover in the drainage system

preventing the wastewater from being discharged.

Drinking water connection

Connect your appliance to a drinking water connection.

Installing the drinking water connection

Note

●If you are replacing the appliance, you must use a new

water supply hose.

1. Consult the installation instructions supplied for the steps

required here.

2. Connect the appliance to the drinking water connection

using the enclosed parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ikea 805.484.54 Kallboda Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ikea 805.484.54 Kallboda

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info