Bedienungsanleitung Ikea DATID HW400 (Seite 4 von 4) (Englisch)

468480

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

5019 618 33115/A

The hood is designed for use in “Extractor version” or in

“Filter version”

Extractor Version

(see symbol in installation handbook)

fumes are extracted and expelled to the outside through a

fumes exhaust hose (not supplied) fixed to the collar at the top

of the hood.

In accordance with the exhaust hose purchased, provide a

suitable fixing system to secure it to the collar.

Warning: If already installed, remove the carbon filter/s.

Filter Hood

(see symbol in installation handbook)

Air is filtered through a carbon filter/s and recycled into the

surrounding environment.

Warning: check that air recirculation is facilitated (to this end,

carefully follow the instructions given in the installation

handbook)

Warning! If the hood does not have a carbon filter/s, order

one/them and fit it/them before use.

The hood comes provided with hardware (e.g.: screws and/or

plugs) suitable for most walls/ceilings. However, a qualified

technician is needed to make sure that such hardware is

suitable for your wall/ceiling. The wall/ceiling must be strong

enough to take the weight of the hood.

Extremely heavy product; hood handling and

installation must be carried out by two or more

persons.

DESCRIPTION OF THE HOOD

1. Control panel.

Light :

move the button to the right.

Extraction speed :

move the button to the right to increase power/speed.

2. Grease filters.

3. Lamp covers (or halogen lamps, depending on the

model).

4. Telescopic flue.

Grease filters:

Metal grease filters have an unlimited

life and should be washed once a

month either by hand or in a

dishwasher at a low temperature and

with a short cycle. Washing in a

dishwasher can cause grease filters to

turn white, but this in no way affects

efficiency.

a. Press the handle to release the filter

b. remove the filter.

Wash the filter and leave it to dry, proceeding in reverse

order to refit it.

Bulb/s:

Remove the filters and remove the

burnt-out bulb.

Refit the filters.

Halogen bulbs:

Use a small screwdriver or other

suitable tool to prise off the cover.

Snap-fit the cover back on.

Use only max 40 W max - E14

bulbs or max 12V-20W- G4 halogen bulbs (depending

on the model), taking care not to touch them with

your hands.

Fitting or replacing the carbon filter (filter hoods only).

Change the carbon filter every four months.

1. Remove the grease filters.

2. Fit the filter/s over the motor according to the model:

•align the pins R on the cowl with the slots S, then

turn the filter clockwise until it locks in place.

3. Reverse the above procedure to remove the carbon

filter.

4. Refit the grease filters.

Cleaning the hood

Warning! Failure to remove oil and grease (at least once a

month) could lead to fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ikea DATID HW400 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ikea DATID HW400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info