Bedienungsanleitung Iluv i398 (Seite 3 von 17) (Englisch)

504348

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

GETTING STARTED

iLuv | 3i399/398 | V11M11_IM_EN_012020092 | iLuv

i399/i398 supports both of external DC power supply and

battery power supply, before operate in battery power

supply, please unplug the external DC plug and install the

batteries as following instructions:

Installing the battery

GETTING STARTED

IMPORTANT:

1. Occasionally, les on iPod can become corrupted. This may cause an erratic behavior with your

iLuv products. Apple Inc. recommends that you visit their website www.apple.com to obtain

instructions on resetting or restoring your iPod to factory settings.

2. It is imperative that you use the correct dock adapter for your iPod and that the dock adapter ts

appropriately into the built-in universal dock. Ignoring these rules can cause severe damage to

your iPod. Please refer to the section “Installing the Dock Adapter” to properly install the dock

adapter before operating the i399/i398 with your iPod.

Installing the AC Adapter

Locate the AC adapter jack on the back of the unit.

Insert the AC adapter cable into the jack, and plug into the

wall outlet.

In order to oer consistent clock settings, the i399/i398 uses a backup battery system. This means

that in the event of a power failure, all time settings of the i399/i398 will remain saved. For example,

after the installation of the Backup Battery, the AC cord is disconnected or a power failure occurs,

the display will NOT remain lit, but the time and date settings will be temporarily maintained. To

install Backup Battery, follow the instructions below:

Installing the Backup Battery for Clock Settings

1. Locate the battery compartment on the rear side of the

unit and open the battery door.

2. Insert 8 pcs “D” size batteries, following the correct

polarity (+/-) drawings inside the battery compartment.

For longer battery life, alkaline batteries are suggested.

3. Secure the battery compartment by closing the door.

1. Make sure the connection between the AC adapter and the unit is secure. This is important

because during battery replacement it is possible for all settings to be lost if time have already

been set.

2. Locate the battery compartment on the rear side of the unit and open.

3. Insert 2 “AAA” batteries, following the correct

polarity (+/-) drawings inside the battery

compartment. For longer battery life, alkaline

batteries are suggested. Please note that new

and used batteries should not be mixed.

Likewise, alkaline, standard (carbon-zinc) or

rechargeable (nickel-cadmium) batteries should

not be used together.

4. Secure the battery compartment by closing

the cover.

Important Notes on Batteries

To prevent battery leakage, which may result in bodily injury, property damage or damage to the

unit, follow these instructions.

· Install all batteries correctly according to the polarity (+/-) as marked on the unit.

· Do not mix old and new batteries, carbon and alkaline, etc.

· Remove batteries from the unit when the device will not be used for an extended period of time.

Please dispose the used batteries properly according to your local government regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Iluv i398 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info