Bedienungsanleitung Iluv i399 (Seite 10 von 17) (Englisch)

504349

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

OPERATIONAL INSTRUCTIONS

BluePin Setup and operating Instructions - continued

b. Ensure that BluePin is powered on, if not, press the

BluePin ON/OFF button of i399/i398 to turn on the

BluePin, the “Bluetooth” icon will ash.

c. Press the MODE button of i399/i398 or the BluePin

button of the remote control to enter to BluePin

RCV (receive) function.

d. Follow the previous instructions (number 8) to pair with a

cell phone with Bluetooth technology.

e. Now you can enjoy the speakerphone function.

f. Receive a call: (three dierent ways)

- If there is an incoming call, i399/i398 will ring, press

the SPEAKER PHONE/CALL button of i399/i398 or

remote control to receive the call.

- Also you can press the OK button of cell phone to

receive the call.

- If you want to mute the microphone during talking,

press the SPEAKER PHONE/CALL button, the LCD will

show a “MIC MUTE” icon, press the SPEAKER PHONE/

CALL button again to release the microphone muting.

iLuv | 17i399/398 | V11M11_IM_EN_0120200916 | iLuv

OPERATIONAL INSTRUCTIONS

BluePin Setup and operating Instructions - continued

g. Make a call: (three dierent ways)

- Simply dial the telephone number from cell phone to make a phone call.

- Press the PAIRING button on the BluePin, or press the SPEAKERPHONE/CALL button on the

i399/i398 or press the CALL button on remote control to make the voice call.

- Press and hold the PAIRING button on the BluePin or the SPEAKERPHONE/CALL button

on the i399/i398 or press the CALL button on remote control for three (3) seconds to dial the

last dialed number.

h. End a call:

- During talking, press the PAIRING button of BluePin to end this call.

- Or press the END CALL button of i399/i398 or remote control to end this call.

- Also you can press the END button of cell phone to end the call.

i. Reject a call:

- If there is an incoming call, press and hold the PAIRING button of BluePin for three (3) seconds

to reject the call.

- Or press the END CALL button of i399/i398 or press the END CALL button on remote control

to reject the call.

- You can also press the END button of cell phone to reject the call.

Note: To operate the speakerphone call, BluePin must be connected with a cell phone with Bluetooth technology rst. When iPod

works in iPod, FM or AUX IN mode, if there is an incoming call, or you make a call, i399/i398 will change to BluePin mode

automatically. After ending the call, i399/i398 will resume the previous worked mode.

10. To pair with Bluetooth stereo headset with Bluetooth Stereo Prole (A2DP) (SEND Mode):

a. Place the BluePin in the BluePin port and press the BluePin ON/OFF button of i399/i398 to

turn on the BluePin,

b. Push the PAIRING button of BluePin or the PAIRING button of i399/i398 for 3 seconds until

you get red and blue ashing light.

c. Push the PAIRING button on the headset with Bluetooth technology to start pairing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Iluv i399 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info