Bedienungsanleitung Iluv i9300D (Seite 13 von 21) (Englisch)

504364

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

OPERATIONAL INSTRUCTIONS

Compact Disc Operation - continued

3. Press REPEAT three times to have all the inserted CDs (up to 4)

played continuously.

Track selection

Press TUNING + SKIP/SEARCH and TUNING – SKIP/SEARCH to select the desired tracks.

The tracks can be selected directly by pressing the corresponding numerical buttons 1 - 0 / +10.

The selected number appears on the display. If the CD player is in stop mode, play starts automati-

cally when a track is selected using the numerical buttons.

Search operation

While the CD is in play mode you can scan tracks by holding down TUNING + SKIP/SEARCH

and TUNING - SKIP/SEARCH. The CD will continue to play until you nd the track you want.

When you release the button the unit will resume normal play mode.

Track intro-scan

1. Press INTRO while in stop mode to play the rst 10 seconds of each track on all inserted CDs.

2. Press INTRO again and the selected track will play.

Mute function

If the MUTE button is pressed, the audio output will be muted, and the “MUTE” indicator will be

displayed. To cancel “MUTE” press the MUTE button once more or press the VOLUME UP/DOWN

button.

Program memory

The built-in program memory lets you play up to 40 tracks

(from up to 4 CDs) in the order of your choice. A track can be stored

more than once within the program.

1. Load the CDs.

2. Press MEM./CLK ADJ. (22)/(53) in the stop mode to switch to

programming mode.

OPERATIONAL INSTRUCTIONS

Compact Disc Operation - continued

3. Select a CD by pressing the corresponding DISC 1 - 4 button.

4. Select the desired track using the numerical buttons 0 - 9 / +10 on

the remote control or by repeatedly pressing TUNING + SKIP/SEARCH

and TUNING + SKIP/SEARCH.

5. Press MEM./CLK ADJ. to save the track in the rst program location.

For example, if you selected CD 1, track number 14, it will appear in

Program position 1 as shown below.

6. For the next program position, reselect this or another CD and select a track.

7. Conrm the selection using the MEM./CLK ADJ. button.

8. To program other tracks in the memory, repeat steps 3 - 7.

9. To play the program, press PLAY/PAUSE. The program can be played back again as long as

MEMORY appears on the display.

To clear the programming and resume normal playback

The programming is erased by pressing STOP until the MEMORY display disappears, or by open-

ing the CD changer door. If the unit is switched o, the program is not erased.

Note:

1. RANDOM will not function in programmed play.

2. This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 le(s).

If you select a folder which doesn’t contain any MP3 le(s), the unit will automatically skip to the

next folder until it nds one containing an MP3 le(s).

iLuv | 24i9300 | V10M10_IM_EN_1111200823 | iLuv

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Iluv i9300D Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info