Note that if the ESC gets wet, it can cause it to believe that an overvoltage condition exists.
Q. My Vortex emits 2 long beeps followed by a short beep on startup (--·)
This sequence is played on startup when the vortex was not able to detect a camera.
In that case you should check the camera is correctly plugged on both side.
Q. When I fly, all I see is the ground
Tilt the flight camera up! (but beware that landing with a heavily tilted flight camera can be more of a challenge).
A useful trick when setting camera angle is to take note of the position of your head while flying. If you find
yourself constantly looking up, angle the camera up. If you find yourself constantly looking down, angle the
camera down.
Q. My Vortex flips instead of taking off
Check that the correct props (CW vs. CCW) are installed in the correct locations.
Also check that the props rotate in the correct direction, and run RotorSENSE on each motor that needs
reversing.
Q. I updated to the latest BetaFlight x.y.z and my quad is no longer tuned
BetaFlight is a superb piece of software, updated almost daily to add new features, and is really the ‘bleeding
edge’ of flight controller code. Unfortunately, this also means that ‘stability’, or ‘backwards compatibility’ is not
a priority.
The Pro-Tunes shipped with the Vortex 230 Mojo were painstakingly tuned using the version of Betaflight that
we shipped with. We cannot guarantee that all future versions of either of these firmware bases will keep this
same fine level of tune.
From time to time we will commit to providing updates which synchronize the OSD, Flight Controller, and the
Pro-Tunes. Check the ImmersionRC website, Vortex 230 Mojo page occasionally for news on these updates. .
Regulatory notice
The use of this product may be prohibited in your country/region/state, please verify that the RF output
power and frequencies used by this transmitter comply with local rules and regulations, this product may
require a license to operate.
Directions on safety
ImmersionRC advocates the safe use of their products, always make sure you equipment is in proper
working order, is checked prior to every flight and that your are familiar with and respect the equipment's
capabilities and limitations. Do NOT fly recklessly, do NOT fly near airports, freeways, towns, people, etc,
basically anywhere where a equipment failure or pilot error can result in injury or damage to people
and/or property.
Warranty
For warranty claims or repair requests please consult the retailer that you purchased this product from,
they will be able to help you with your warranty claim or repair request.
