1 Battery: extraction, charge, insertion, use and maintenance
Battery is located on the lower-central beam and it should be fully charged before using. If
you need to take out the battery, please follow the steps below:
1.1 Extract battery: turning the key clockwise to loose
latch. The unlocked battery can be taken extracted (the
key has been turned to the bottom).
1.2 Hold the key with your right hand while reaching for
the handle with your left hand: pull the handle up first
and pull it out leftward.
1.3 Charge: connect the charging plug of the charger to
the battery, and then, plug the charger power plug into
AC socket, finally remove battery separator and turn the
switch on.
The charging time is about 4 hours (initial electric
quantity is zero), and if the battery has parts of electric
quantity, charging time should be shortened. But for fully
charging maintenance, charging time will be extended:
generally the expected additional charging time of
battery is 1-2 hours.
1.4 Reinsert battery: insert the battery into the groove on the lower-central beam (see A) and
push it down to the end until the battery is completely locked (see B).
Images A & B are on the next page.
