Bedienungsanleitung Indesit DFP 27B1 (Seite 24 von 56) (Englisch, Italienisch)

575315

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Refined Salt and Rinse Aid

Only use products which have been specifically designed

for dishwashers. Do not use table salt or industrial salt.

Follow the instructions given on the packaging.

If you are using a multi-function product, we recommend

that you add salt in any case, especially if the water is hard or

very hard.

(Followtheinstructionsgivenonthepackaging.)

If you do not add salt or rinse aid, the LOW SALT* and

LOW RINSE AID

* indicator lights will remain lit.

Measuring out the refined salt

TheuseofsaltpreventstheformationofLIMESCALEonthedishes

and on the machine’s functional components.

•Itisimportantthatthesaltdispenserbeneverempty.

•Itisimportanttosetthewaterhardness.

The salt dispenser is located in the lower part of the dishwasher

(seeDescription)

and should be filled:

• WhentheLOWRINSEAIDindicatorlightinthecontrolpanel

is lit *;

• Whenthegreenfloat* on the cap of the salt dispenser is no

longer visible.

• Seeautonomyinthewaterhardnesstable.

1.Removethelowerrackandunscrewthe

containercap(anticlockwise).

2. Only the first time you do this: fill the water

dispenser up to the edge.

3.Position thefunnel

(seefigure)

and

fill the salt container right up to its edge

(approximately1kg);itisnotunusualfora

little water to leak out.

4.Removethefunnelandwipeanysaltresidueawayfromthe

opening; rinse the cap under running water and then screw it on.

It is advisable to perform this procedure every time you add salt

to the container.

Make sure the cap is screwed on tightly, so that no detergent can

getintothecontainerduringthewashcycle(thiscoulddamage

the water softener beyond repair).

Whenever you need to add salt, we recommend carrying out

the procedure before the washing cycle is started.

Setting the water hardness

For perfect water softener operation, it is essential that the

adjustment be based on the water hardness in your house. Ask

your local water supplier for this information. The factory setting

is for medium water hardness.

•SwitchthedishwasheronusingtheOn/Offbutton.

•SwitchitoffusingtheOn/Offbutton

•PressandholdtheSTART/PAUSEbutton for 5 seconds.

•SwitchitonusingtheOn/Offbutton

•Thesaltindicatorlightflashes(asmanytimesasthecurrent

selection.)

•Settheknobtothedesiredhardnesslevelnumber

(seeTable

on water hardness.)

•SwitchitoffusingtheOn/Offbutton

•Settingiscomplete!

Even if using multi-functional tablets, the salt dispenser should

still be filled.

Measuring out the rinse aid

Rinseaidmakes dishDRYINGeasier. Therinseaid dispenser

should be filled:

• WhentheLOWRINSEAIDindicatorlightonthepanel/display

is lit *;

• Whenthedarkopticalindicator* on the dispenser door “D”

becomes transparent.

1. Open the dispenser

“D” by pressing and pulling up the tab

on the lid;

2.Carefullyintroducetherinseaidasfarasthemaximumreference

notch of the filling space - avoid spilling it. If this happens, clean

the spill immediately with a dry cloth.

3.Presstheliddownuntilyouhearaclicktocloseit.

NEVER pour the rinse aid directly into the appliance tub.

Rinse-aid dispenser setting

If you are not completely satisfied with the drying results, you can

adjust the quantity of rinse aid.

•SwitchthedishwasheronusingtheOn/Offbutton.

•SwitchitoffusingtheOn/Offbutton

•PresstheSTART/PAUSEbutton three times

•SwitchitonusingtheOn/Offbutton

•Everythingisoff

•Settheknobtothelevelnumberofrinseaidquantitytobe

supplied.

•SwitchitoffusingtheOn/Offbutton

•Settingiscomplete!

IftherinseaidlevelissettoZERO(ECO),norinseaidwillbe

supplied.TheLOWRINSEAIDindicatorlightwillnotbelitifyou

run out of rinse aid.

Amaximumof4levelscanbesetaccordingtothedishwasher

model. The factory setting is for a medium level.

•Ifyouseebluishstreaksonthedishes,setalownumber(1-2).

•Iftherearedropsofwaterorlimescalemarksonthedishes,

setahighnumber(3-4).

Water Hardness Table

Average salt dispenser

capacity duration**

level °dH °fH mmol/l months

1 0 - 6 0 - 10 0 - 1 7 months

2 6 - 11 11 - 20 1,1 - 2 5 months

3 12 - 17 21 - 30 2,1 - 3 3 months

4 17 - 34 31 - 60 3,1 - 6 2 months

34 - 50 61 - 90 6,1 - 9 2/3 weeks

For values between 0°f and 10°f, we do not recommend the use of salt.

* a setting of 5 may increase cycle duration.

** 1 wash cycle per day.

(°dH = hardnessmeasured in Germandegrees - °f =hardness

measuredinFrenchdegrees–mmol/l=millimolesperlitre)

* Only available in selected models.

Indesit DFP 27B1 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Indesit DFP 27B1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info