Bedienungsanleitung Indesit DIFP 18B1 (Seite 7 von 20) (Englisch)

575196

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Electrical Connection

Ifyourapplianceissuppliedwitha13amp.fusedplugitcan

bepluggedintoa13ampsocketforimmediateuse.Before

using the appliance please read the instruction below.

WARNING: THIS APPLIANCE MUST BE EARTHED.

THE FOLLOWING OPERATIONS SHOULD BE

CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse,a 13 amp ASTAapproved

fusetoBS1362shouldalwaysbeused,andthefusecover

re-fitted. If the fuse cover is lost, the plug must not be used

until a replacement is obtained.

Replacemente fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colours as indicated by the coloured marking or the

colour that is embossed in words on the base of the plug.

Replacementscanbeobtaineddirectlyfromyournearest

Service Depot.

Removing the plug:

Ifyour appliance has a non-rewireable moulded plug and you

should wish to remove it to re-route the mains cable through

partitions, units etc., please esure that either:

-theplugisreplacedbyafused13ampre-wireableplug

bearing the BSI mark of approval

- or:

- the mains cable iswired directly into a13 ampcable

outlet, controlled by a switch, (in compliance

with BS 5733) which is accessible without moving

the appliance.

Disposing of the plug:

Ensure that before disposing ofthe plug itself, youmake

the pins unusable so that it cannot be accidentally inserted

into a socket.

Instruction for connecting cable to an altenative

plug:

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

CAUTION:

- Once the appliance has been installed, the electrical plug

and socket should remain accessible.

- The Company shall not be held responsible for any

incidents that occur if these regulations are not observed.

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminal in your plug, proceed as follows:

connect Green & Yellow wire to terminal market “E” or

coloured Green or Green & Yellow.

Connect Brown wire to terminal marked “L”

orcolouredRed.

Connect Blue wire to terminal marked “N” or coloured Black.

Ifa13ampplug(BS1363)isuseditmustbefittedwitha

13ampfuse.A15ampplugmustbeprotectedbya15amp

fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your

machine,consultaqualifiedelectricianbeforeuse.

How to connect an alternative plug:

The wires in this mains lead are coloured in accordance with

the following code:

BLUE   “NEUTRAL” (“N”)

BROWN “LIVE” (“L”)

GREENANDYELLOW “EARTH” (“E”) or

Disposing of the appliance:

Whendisposingoftheappliancepleaseremovetheplug

by cutting the mains cable as close as possible to the plug

body and dispose of it as described above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit DIFP 18B1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Indesit DIFP 18B1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info