Bedienungsanleitung Indesit DIFP 48T9 (Seite 4 von 8) (Englisch)

685036

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

DELAY

The start time of the program may be delayed for a

period of time between 1 and 12 hours.

1. Press the DELAY button: the corresponding symbol

appears on the display; each time you press the button,

the time (1h, 2h, etc. up to max. 12h) from the start of

the selected wash cycle will be increased.

2. Select the wash program and close the door: the timer

will begin counting down;

3. Once this time has elapsed, the indicator light switches

o and the wash cycle begins.

To adjust the delay time and select a shorter period of

time, press the DELAY button. To cancel it, press the

button repeatedly until the selected delayed start

indicator light switches o.

The wash program will start automatically as soon as the

door is shut.

The Delay function cannot be set once a wash cycle

has been started.

EXTRA

EXTRA makes it possible to carry out a heavy-duty

wash cycle of large crockery up to a max height of 53

cm: baking pans, oven grids, dripping pans, hob grids,

large saucepans, serving dishes, pizza dishes, stainless-

steel hood lters.

Remove the upper rack to load bulky crockery.

Release the two locks (right

and left) and pull out the

rack.

When the upper rack is

tted, the locks must be

always closed.

In order for the

water to reach

the crockery

everywhere,

arrange it as shown

in the Figure.

Do not start the dishwasher without the upper rack

using wash cycles other than EXTRA.

To carry out the wash cycle Extra pour the detergent

DIRECTLY INTO THE TUB and not into the dispenser.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

CoolDry

CoolDry is a convection drying system which automatically opens the

door during/after drying phase to ensure exceptional drying perfor-

mance every day. Door opens at the temperature that is safe to your

kitchen furniture, thus door will not be opened when the option of

SANI RINSE or TURBO are on.

As additional steam protection, special designed protection foil is ad-

ded together with the dishwasher. To see how to mount protection foil

please refer to (INSTALLATION GUIDE).

CoolDry functionality could be disabled by the user as follows:

1. Go to the Dishwasher software menu pressing

and holding P button (6 sec).

2.YouarecurrentlyinLightControlMenu(pleaserefertoLIGHTMY

CYCLE description), if you don’t want to change anything please press

and hold P button until one of the two letters appears on the display.

3. You switched to CoolDry Control Menu, you could change

status of CoolDry functionality by pressing P button:

E – enabled d – disabled

To conrm the change and exit from the Control Menu please press

and hold P button (3 sec).

LIGHT MY CYCLE

Some dishwasher models are equipped with a green indicator

light in the gap between the door and kitchen top providing

information on the phase of the current wash cycle. One of

the following operating modes can be selected:

a) Disabled function.

b) When the cycle starts the light goes on for few seconds,

stays o during the cycle and ashes at the end of the cycle

(default mode).

c) The light stays on during the cycle and ashes at the end

of the cycle.

If the delayed start was set, the light goes on either for the rst

few seconds or the entire duration of the countdown, based

on whether mode b) or c) was set.

The light goes o every time the door is opened. To select the

mode you prefer, switch on the machine, hold down button

P until one of the three letters appears on the display, press

button P until you reach the desired letter (or mode), hold

down button P to conrm the selection.

Note: If CoolDry is active and it opens the door, then

LIGHT MY CYCLE will not ash at the end of cycle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit DIFP 48T9 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Indesit DIFP 48T9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info