Bedienungsanleitung Indesit FIM 53 KCA S (Seite 22 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

577375

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load

indicated on the data plate (see table).

The appliance must be directly connected to the mains using

an omnipolar switch with a minimum contact opening of 3

mm installed between the appliance and the mains. The

switch must be suitable for the charge indicated and must

comply with current electrical regulations (the earthing wire

must not be interrupted by the switch). The supply cable

must be positioned so that it does not come into contact

with temperatures higher than 50°C at any point (the back

panel of the oven, for example).

! The installer must ensure that the correct electrical

connection has been performed and that it is fully compliant

with safety regulations.

Before connecting the appliance to the power supply, make

sure that

• The appliance is earthed and the plug is compliant with

the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate.

• The voltage is in the range between the values indicated

on the data plate.

• The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it. Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

APPLIANCE SPECIFICATIONS

Dimensions*

width 43.5 cm

height 32,4 cm

depth 40.6 cm

Volume*

58 l

Dimensions**

width 45.5 cm

height 32,4 cm

depth 40.6 cm

Volume**

60 l

Electrical

connections

Voltage: 220 - 240 V~ 50/60 Hz

(see data plate) maximum power

absorbed 2250 W

* Only for models with drawn rails.

** Only for models with wire rails.

ENERGY

LABEL

This appliance conforms to the

following European Economic

Community directives:

- 2006/95/EEC dated 12/12/06 (Low

Voltage) and subsequent amendments.

- 2004/108/EEC dated 03/05/89

(Electromagnetic Compatibility) and

subsequent amendments.

- 93/68/EEC dated 22/07/93 and

subsequent amendments.

- 2002/96/EC and subsequent

amendments.

Directive 2002/40/EC on the label

of electric ovens.

Standard EN 50304

Models with cooling ventilation:

Energy consumption for Natural

convection heating mode:

Convection

Declared energy consumption for

Forced convection Class heating

mode: Multi-cooking

Models without cooling

ventilation

Energy consumption for Forced

convection heating mode:

Multi-cooking

Declared energy consumption for

Natural convection Class heating

mode: Convection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit FIM 53 KCA S Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info